Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
SMA KumhoSunny SMA HSG5415 Shanghai KumhoSunny Plastics Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny SMA HSG5415 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 10 kJ/m² |
| -30°C | ISO 179 | 7.0 kJ/m² | |
| Impact strength of cantilever beam gap | 23°C | ISO 180 | 10 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | 30 kJ/m² |
| hardness | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny SMA HSG5415 |
|---|---|---|---|
| Rockwell hardness | R计秤,23°C | ISO 2039-2 | 115 |
| Electrical performance | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny SMA HSG5415 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms |
| Mechanical properties | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny SMA HSG5415 |
|---|---|---|---|
| tensile strength | ISO 527-2/50 | 73.0 MPa | |
| Flexural modulus | ISO 178 | 5000 MPa | |
| Tensile strain | 断裂 | ISO 527-2/50 | 5.0 % |
| bending strength | ISO 178 | 110 MPa |
| physical property | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny SMA HSG5415 |
|---|---|---|---|
| Shrinkage rate | 23°C | ISO 294-4 | 0.30to0.50 % |
| density | 23°C | ISO 1183 | 1.15 g/cm³ |
| melt mass-flow rate | 265°C/5.0kg | ISO 1133 | 8.0 g/10min |
| Thermal performance | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny SMA HSG5415 |
|---|---|---|---|
| vicat | ISO 306/B50 | 120 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 117 °C |
Contact Us
Get App
Top