Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT WFL4536 BK SABIC INNOVATIVE US
LNP™ LUBRICOMP™ 
Automotive components,Electronic and electrical accessories
Thermal stability,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodSABIC INNOVATIVE US/WFL4536 BK
Hot deformation temperature1.8MPa,未退火,3.20mmASTM D648218 °C
1.8MPa,未退火,64.0mm跨距ISO 75-2/Af214 °C
Linear coefficient of thermal expansionTD：-40到40°CASTME8316.7E-05 cm/cm/°C
TD：-40到40°CISO 11359-26.7E-05 cm/cm/°C
MD：-40到40°CISO 11359-23.9E-05 cm/cm/°C
MD：-40到40°CASTME8313.9E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/WFL4536 BK
Bending modulusASTM D79010200 Mpa
ISO 17810000 Mpa
bending strengthISO 178187 Mpa
ASTM D790193 Mpa
elongation断裂ASTM D6382.3 %
Friction coefficientDynamicASTM D3702Modified0.57
StaticASTM D3702Modified0.41
Tensile modulusASTM D63810300 Mpa
ISO 527-2/110600 Mpa
Tensile strain断裂ISO 527-22.2 %
tensile strength断裂ASTM D638118 Mpa
断裂ISO 527-2118 Mpa
Wear factorWasherASTM D3702Modified42.0 10^-10in^5-min/ft-lb-hr
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/WFL4536 BK
Shrinkage rateTD：24hrASTM D9550.50-1.0 %
TD:24小时ISO 294-40.50-1.0 %
MD：24小时ASTM D9550.10-0.30 %
MD:24小时ISO 294-40.10-0.30 %
Water absorption rate24hr,50%RHASTM D5700.040 %
平衡,23°C,50%RHISO 620.040 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE US/WFL4536 BK
Dart impact23°C,EnergyatPeakLoadASTM D376313.7 J
Impact strength of cantilever beam gap23°CISO 180/1A9.2 kJ/m²
Multi axis Instrumented Impact EnergyISO 6603-22.61 J
Suspended wall beam without notch impact strength23°CISO 180/1U43 kJ/m²

Contact Us

Get App

Top