Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

COC 8007S JAPAN POLYPLASTIC
TOPAS®
LCD application,Optical applications
Dimensional stability,Chemical resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/8007S |
---|---|---|---|
Hot deformation temperature | 0.45MPaUnannealed | ISO 75-2/Bf | 75 °C |
Vicat softening temperature | ISO 306/B50 | 80 °C | |
玻璃转化温度 | ISO 11357-2 | 78 °C |
mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/8007S |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 2.6 kJ/m² |
Elongation at Break | 23°C | ISO 527-2 | 4.5 % |
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 20 kJ/m² |
Tensile modulus | 23°C | ISO 527-2 | 2600 Mpa |
tensile strength | 23°C | ISO 527-2 | 63 Mpa |
flame retardant performance | Test Condition | Test Method | JAPAN POLYPLASTIC/8007S |
---|---|---|---|
UL flame retardant rating | UL -94 | HB 1.50mm |
Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/8007S |
---|---|---|---|
Dielectric constant | 23°C | IEC 60250 | 2.35 1kHz |
Dissipation factor | 相对漏电起痕指数 | IEC 60112 | 600 V |
Volume resistivity | IEC 60093 | 1E+14 Ω.cm |
Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/8007S |
---|---|---|---|
melt mass-flow rate | 260℃/2.16Kg | ISO 1133 | 32 cm3/10min |
Water absorption rate | (23°C,24hr) | ISO 62 | 0.01 % |
optical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/8007S |
---|---|---|---|
Refractive index | ISO 489 | 1.53 °C | |
Transmittance rate | 2000μm | ISO 13468-2 | 91 % |