Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PBT 5010GN2-30 MITSUBISHI ENGINEERING JAPAN

NOVADURAN™

Bottle cap,Fitness equipment,Electronic field,Electrical field

Glass fiber reinforced,Filler: Glass fiber reinf,30%,Filler by weight

Plastic Datasheets

thermal performance	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010GN2-30
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	>220 °C
Hot deformation temperature		1.8MPa,Unannealed	ISO 75-2/A	208 °C
Linear coefficient of thermal expansion	TD：-30to50°C	ISO 11359-2	7E-05 cm/cm/°C
		TD：-30to120°C	ISO 11359-2	1.1E-04 cm/cm/°C
		MD：50to120°C	ISO 11359-2	2E-05 cm/cm/°C
		MD：-30to120°C	ISO 11359-2	2E-05 cm/cm/°C
		MD：-30to50°C	ISO 11359-2	2E-05 cm/cm/°C
		TD：50to120°C	ISO 11359-2	1.4E-04 cm/cm/°C
Melting temperature		ISO 11357-3	224 °C

mechanical properties	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010GN2-30
Bending modulus		ISO 178	10500 Mpa
bending strength		ISO 178	210 Mpa
Tensile modulus		ISO 527-2	11000 Mpa
Tensile strain	Break	ISO 527-2	2.0 %
tensile strength	Break	ISO 527-2	135 Mpa

Electrical performance	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010GN2-30
Compared to the anti leakage trace index	CTI	UL 746	PLC 3
Dielectric strength	1.00mm	IEC 60243-1	24 KV/mm
Dissipation factor	1MHz	IEC 60250	0.014
Relative permittivity	1MHz	IEC 60250	3.90
Surface resistivity		IEC 60093	6E+15 ohms
Volume resistivity		IEC 60093	5E+16 ohms·cm

Physical properties	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010GN2-30
Shrinkage rate	TD:2.00mm		1.1 %
		吸水率(Saturation,23°C)		0.070 %
		MD:2.00mm		0.40 %

impact performance	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010GN2-30
Impact strength of simply supported beam without notch	23°C	ISO 179	45 kJ/m²

flammability	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010GN2-30
UL flame retardant rating	0.8mm	UL 94	V-0

Get App

Top