Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS TM-25M UMG JAPAN
UMG ABS®
--
heat-resisting
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | UMG JAPAN/TM-25M |
---|---|---|---|
Rockwell hardness | R计秤,23°C | ISO 2039-2 | 113 |
Basic performance | Test Condition | Test Method | UMG JAPAN/TM-25M |
---|---|---|---|
melt mass-flow rate | 4 g/10min |
Mechanical properties | Test Condition | Test Method | UMG JAPAN/TM-25M |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 17 kg·cm/cm(J/M)ft·lb/in | |
bending strength | ASTM D790/ISO 178 | 66 kg/cm²(MPa)[Lb/in²] | |
Flexural modulus | ASTM D790/ISO 178 | 2500 kg/cm²(MPa)[Lb/in²] | |
bending strength | 23°C | ISO 178 | 66.0 Mpa |
Flexural modulus | 2500 Mpa | ||
23°C | ISO 178 | 2500 Mpa | |
Tensile modulus | 23°C | ISO 527-2 | 2400 Mpa |
ASTM D638/ISO 527 | 2400 kg/cm²(MPa)[Lb/in²] | ||
Rockwell hardness | ASTM D785 | 113 | |
Charpy Notched Impact Strength | 17 KJ/m | ||
tensile strength | ASTM D638/ISO 527 | 45 kg/cm²(MPa)[Lb/in²] | |
23°C | ISO 527-2 | 45.0 Mpa |
Physical properties | Test Condition | Test Method | UMG JAPAN/TM-25M |
---|---|---|---|
Shrinkage rate | ASTM D955 | 0.4-0.6 % | |
density | ASTM D792/ISO 1183 | 1.06 | |
melt mass-flow rate | ASTM D1238/ISO 1133 | 4 g/10min |
flammability | Test Condition | Test Method | UMG JAPAN/TM-25M |
---|---|---|---|
UL flame retardant rating | 1.5mm | UL 94 | HB |
physical property | Test Condition | Test Method | UMG JAPAN/TM-25M |
---|---|---|---|
Shrinkage rate | MD:23°C | ISO 294-4 | 0.40-0.60 % |
Melt volume flow rate | 220°C/10.0kg | ISO 1133 | 4.00 cm3/10min |
Thermal performance | Test Condition | Test Method | UMG JAPAN/TM-25M |
---|---|---|---|
Heat distortion temperature | HDT | 98 °C | |
1.8MPa,未退火,HDT | ISO 75-2/Af | 98.0 °C | |
Combustibility (rate) | UL 94 | 1.5 HB | |
Heat distortion temperature | HDT | ASTM D648/ISO 75 | 98 ℃(℉) |
Linear coefficient of thermal expansion | MD | ISO 11359-2 | 9E-05 cm/cm/°C |
ASTM D696/ISO 11359 | 9 mm/mm.℃ | ||
UL flame retardant rating | UL 94 | HB |
Contact Us
Get App
Top