Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 Electrafil® PA6/6 GF13 SS10 BK Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PA6/6 GF13 SS10 BK |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D256 | 480 J/m |
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 53 J/m |
| Electrical performance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PA6/6 GF13 SS10 BK |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+04 ohms·cm | |
| Surface Resistivity | ASTM D257 | 1E+04 ohms | |
| StaticDecay | FTMS101B | <0.1 sec | |
| Electromagnetic shielding effectiveness (EMI) | ASTM D4935 | 40 dB |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PA6/6 GF13 SS10 BK |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.0 % |
| tensile strength | 断裂 | ASTM D638 | 96.5 MPa |
| Flexural modulus | ASTM D790 | 5450 MPa | |
| bending strength | ASTM D790 | 148 MPa |
| flammability | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PA6/6 GF13 SS10 BK |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PA6/6 GF13 SS10 BK |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.60 % |
| density | ASTM D792 | 1.27 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.60 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PA6/6 GF13 SS10 BK |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 249 °C |
Contact Us
Get App
Top