​Plastic Raw Materials
Try searching for materials
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
MABS TR557 NP LG CHEM KOREA
--
Electronic appliances、electronic product
Transparency level、High impact
UL
TDS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Thermal PropertiesTest ConditionTest MethodLG CHEM KOREA/TR557 NP
Vicat Softening TemperatureASTM D1525789.0 °C
RTIUL 74650.0 °C
RTI ImpUL 74650.0 °C
RTI ElecUL 74650.0 °C
Deflection Temperature Under Load?1.8 MPa, 未退火, 6.40 mm, 注塑ASTM D64881.0 °C
HardnessTest ConditionTest MethodLG CHEM KOREA/TR557 NP
Rockwell HardnessR 级, 23°C, 注塑ASTM D785107
InjectionTest ConditionTest MethodLG CHEM KOREA/TR557 NP
Middle Temperature190 到 210 °C
Processing (Melt) Temp190 到 220 °C
Drying Time2.0 到 4.0 hr
Rear Temperature180 到 200 °C
Nozzle Temperature190 到 220 °C
Drying Temperature80 到 90 °C
Front Temperature200 到 220 °C
Back Pressure29.4 到 58.8 Mpa
Mold Temperature40 到 60 °C
Screw Speed30 到 60 rpm
PhysicalTest ConditionTest MethodLG CHEM KOREA/TR557 NP
Melt Mass-Flow Rate220°C/10.0 kgASTM D123821 g/10 min
Modeling Shrinkage - Flow23°C, 3.20 mm, 注塑ASTM D9550.40 到 0.70 %
Mechanical PropertiesTest ConditionTest MethodLG CHEM KOREA/TR557 NP
Tensile Strength屈服, 23°C, 3.20 mm, 注塑ASTM D63848.0 Mpa
Tensile Modulus23°C, 3.20 mm, 注塑ASTM D6382050 Mpa
Tensile Elongation屈服, 23°C, 3.20 mm, 注塑ASTM D638> 5.0 %
Flexural Modulus23°C, 3.20 mm, 注塑ASTM D7902250 Mpa
Tensile Elongation断裂, 23°C, 3.20 mm, 注塑ASTM D63815 %
Flexural Strength23°C, 3.20 mm, 注塑ASTM D79071.0 Mpa
OpticalTest ConditionTest MethodLG CHEM KOREA/TR557 NP
Haze注塑ASTM D10032.0 %
Transmittance3200 µm, 注塑ASTM D100390.0 %
FlammabilityTest ConditionTest MethodLG CHEM KOREA/TR557 NP
UL flame retardant rating3.0 mmUL 94HB
1.5 mmUL 94HB

Contact Us

Get App

Top