Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM FX-11J MITSUBISHI THAILAND
Iupital™ 
Automotive sector、Electronic and Electrical
wear resistant、High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodMITSUBISHI THAILAND/FX-11J
Charpy Notched Impact Strength23°CISO 1795.0 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179100 kJ/m²
Electrical performanceTest ConditionTest MethodMITSUBISHI THAILAND/FX-11J
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
dielectric strength1.00mmIEC 60243-136 KV/mm
Volume resistivityIEC 600931E+14 ohms·cm
dielectric strength3.00mmIEC 60243-119 KV/mm
Surface ResistivityIEC 600931E+16 ohms
Mechanical propertiesTest ConditionTest MethodMITSUBISHI THAILAND/FX-11J
Tensile modulusISO 527-22700 Mpa
Nominal tensile fracture strainISO 527-225 %
bending strengthISO 17881.0 Mpa
Flexural modulusISO 1782500 Mpa
Tensile strain屈服ISO 527-27.5 %
tensile strength 屈服ISO 527-255.0 Mpa
flammabilityTest ConditionTest MethodMITSUBISHI THAILAND/FX-11J
UL flame retardant rating0.8mmUL 94HB
physical property Test ConditionTest MethodMITSUBISHI THAILAND/FX-11J
Melt volume flow rate190°C/2.16kgISO 113346.0 cm3/10min
Water absorption rate平衡,23°C,50%RHISO 620.22 %
densityISO 11831.39 g/cm³
melt mass-flow rate190°C/2.16kgISO 113353 g/10min
Shrinkage rateMD：3.00mm2.1 %
Thermal performanceTest ConditionTest MethodMITSUBISHI THAILAND/FX-11J
melting temperatureISO 11357-3166 °C
Heat distortion temperature0.45MPa,未退火，HDTISO 75-2/B156 °C
1.8MPa,未退火，HDTISO 75-2/A95.0 °C
Linear coefficient of thermal expansionMDISO 11359-21.1E-04 cm/cm/°C
TDISO 11359-21.1E-04 cm/cm/°C

Contact Us

Get App

Top