Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PEI JL-4030 BK SABIC INNOVATIVE US
ULTEM™
Electronic and electrical accessories
Hydrolysis resistance,wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/JL-4030 BK |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed,3.20mm | ASTM D648 | 170 °C |
0.45MPa,Unannealed,64.0mmSpan | ISO 75-2/Bf | 179 °C | |
1.8MPa,Unannealed,64.0mmSpan | ISO 75-2/Af | 169 °C | |
0.45MPa,Unannealed,3.20mm | ASTM D648 | 178 °C |
mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/JL-4030 BK |
---|---|---|---|
Bending modulus | ISO 178 | 2300 Mpa | |
ASTM D790 | 2070 Mpa | ||
bending strength | ASTM D790 | 75.8 Mpa | |
ISO 178 | 79.0 Mpa | ||
elongation | Break | ASTM D638 | 9.9 % |
Friction coefficient | Dynamic | ASTM D3702Modified | 0.23 |
Static | ASTM D3702Modified | 0.13 | |
Tensile strain | Break | ISO 527-2 | 12 % |
tensile strength | Break | ASTM D638 | 55.2 Mpa |
Break | ISO 527-2 | 55.0 Mpa | |
Wear factor | Washer | ASTM D3702Modified | 24.5 10^-10in^5-min/ft-lb-hr |
Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/JL-4030 BK |
---|---|---|---|
Shrinkage rate | TD:24hr | ASTM D955 | 0.70-0.90 % |
TD:24hr | ISO 294-4 | 0.83 % | |
MD:24hr | ASTM D955 | 0.70-0.90 % | |
MD:24hr | ISO 294-4 | 0.76 % | |
Water absorption rate | 24hr,50%RH | ASTM D570 | 0.10 % |
impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/JL-4030 BK |
---|---|---|---|
Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 6.1 kJ/m² |
Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 55 kJ/m² |