Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 943 WH SABIC INNOVATIVE NANSHA
LEXAN™
Electrical appliances、Plastic bag、Electronic field、Electrical field
Flame retardant、Easy to process、Impact modification、Bromine free
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/943 WH |
|---|---|---|---|
| Vicat Softening Temperature | ASTMD15255 | 152 °C | |
| Heat Deflection Temperature | 1.8MPa,未退火,6.40mm | ASTMD648 | 132 °C |
| RTIElec | UL746 | 130 °C | |
| Thermal Conductivity | ASTMC177 | 0.19 W/m/K | |
| RTIStr | UL746 | 130 °C | |
| Linear thermal expansion coefficient | MD：-40到95°C | ASTME831 | 6.8E-05 cm/cm/°C |
| Evolution Calendar intelligent importer | UL746 | 120 °C | |
| Heat Deflection Temperature | 0.45MPa,未退火,6.40mm | ASTMD648 | 138 °C |
| Hardness | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/943 WH |
|---|---|---|---|
| Rockwell Hardness | M计秤 | ASTMD785 | 70 |
| R计秤 | 118 |
| Physical | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/943 WH |
|---|---|---|---|
| Moisture Absorption | 24hr | ASTMD570 | 0.15 % |
| Modeling Shrinkage | MD：3.20mm | 内部方法 | 0.50to0.70 % |
| Melt Mass-Flow Rate | 300°C/1.2kg | ASTMD1238 | 10 g/10min |
| Moisture Absorption | 平衡,23°C | ASTMD570 | 0.35 % |
| Specific Volume | ASTMD792 | 0.835 cm³/g | |
| Outdoor Suitability | UL746C | f1 | |
| Moisture Absorption | 平衡,100°C | ASTMD570 | 0.58 % |
| Mechanical Properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/943 WH |
|---|---|---|---|
| Flexural Modulus | 50.0mm跨距 | ASTMD790 | 2240 Mpa |
| Flexural Strength | 屈服,50.0mm跨距 | 91.0 Mpa | |
| Tensile Elongation | 屈服 | ASTMD638 | 7.0 % |
| 断裂 | 90 % | ||
| Tensile Strength | 屈服 | 62.1 Mpa | |
| 断裂 | 55.8 Mpa | ||
| Taber Abrasion Resistance | 1000Cycles,1000g,CS-17转轮 | ASTMD1044 | 10.0 mg |
| Impact Properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/943 WH |
|---|---|---|---|
| Gardner Impact | 23°C | ASTMD3029 | 169 J |
| Tensile Impact Strength | ASTMD1822 | 525 kJ/m² |
| Flammability | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/943 WH |
|---|---|---|---|
| Oxygen Index | ASTMD2863 | 35 % | |
| Flame Rating | 1.5mm | UL94 | V-0 |
| Electrical Properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/943 WH |
|---|---|---|---|
| Dissipation Factor? | 50Hz | ASTMD150 | 9E-04 |
| 60Hz | 9E-04 | ||
| 1MHz | 0.010 | ||
| Hot-wire Ignition | HWI | UL746 | PLC 1 |
| High Amp Arc Ignition | HAI | PLC 2 | |
| Volume Resistivity | ASTMD257 | >1.0E+17 ohms·cm | |
| High Voltage Arc Tracking Rate | HVTR | UL746 | PLC 3 |
| Dielectric Constant | 60Hz | ASTMD150 | 3.01 |
| 50Hz | 3.01 | ||
| 1MHz | 2.96 | ||
| Arc Resistance | ASTMD495 | PLC7 | |
| Dielectric Strength | 3.20mm,inAir | ASTMD149 | 17 KV/mm |
| Comparative Tracking Index | CTI | UL746 | PLC 3 |
Contact Us
Get App
Top