Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TSU Innothane® IE-5000 Innovative Polymers, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | Innovative Polymers, Inc./Innothane® IE-5000 |
|---|---|---|---|
| Surface resistivity | ASTM D270 | 2.8E+16 ohms |
| Uncured Properties | Test Condition | Test Method | Innovative Polymers, Inc./Innothane® IE-5000 |
|---|---|---|---|
| viscosity | 25°C3 | 1.2 Pa·s | |
| 25°C2 | 0.050 Pa·s | ||
| GelTime | 15to25 min | ||
| 25°C4 | 4.8 Pa·s | ||
| 固化时间5 | 40 hr |
| thermosetting | Test Condition | Test Method | Innovative Polymers, Inc./Innothane® IE-5000 |
|---|---|---|---|
| Thermosetting components | Hardener | 按重量计算的混合比:100按容量计算的混合比:100 | |
| Resin | 按重量计算的混合比:100按容量计算的混合比:90 | ||
| Demold Time | 300to420 min |
| Cured Properties | Test Condition | Test Method | Innovative Polymers, Inc./Innothane® IE-5000 |
|---|---|---|---|
| Dielectric strength | 25°C | ASTM D149 | 22 kV/mm |
| Dissipation factor | 1kHz,25°C | ASTM D150 | 0.015 |
| elongation | Break | ASTM D638 | 200 % |
| Relative permittivity | 25°C | ASTM D150 | 2.50 |
| Shore hardness | ShoreA | ASTM D2240 | 35to45 |
| tear strength | ASTM D624 | 13.1 kN/m | |
| tensile strength | ASTM D638 | 2.76 MPa | |
| Volume resistivity | ASTM D270 | 2E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | Innovative Polymers, Inc./Innothane® IE-5000 |
|---|---|---|---|
| density | 基体Resin | 1.11 g/cm³ | |
| Hardener | 1.00 g/cm³ |