PBT 5010N6-X3 PBT vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PBT MITSUBISHI ENGINEERING JAPAN 5010N6-X3

Halogen-free flame retardant grade

US$ 4,690 / MT

FOB Shenzhen Port

injection	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010N6-X3
Drying time - vacuum dryer			5.0 to 8.0 hr
Injection speed			中等偏快
Temperature at the front of the material cylinder			250 °C
Spray nozzle temperature			245 °C
Screw speed			80 to 120 rpm
Mold temperature			60 to 80 °C
Injection pressure			20.0 to 150 Mpa
Temperature in the middle of the barrel			240 °C
Drying Temperature - Vacuum Drying Machine			120 °C
Temperature at the rear of the barrel			235 °C
mechanical properties	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010N6-X3
bending strength		ISO 178	90.0 Mpa
Tensile modulus		ISO 527-2/1	2800 Mpa
tensile strength	Yield	ISO 527-2/50	57.0 Mpa
Tensile strain	Break	ISO 527-2/50	20 %
Bending modulus		ISO 178	2500 Mpa
Tensile strain	Yield	ISO 527-2/50	4.3 %
Physical properties	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010N6-X3
Shrinkage rate	横向Flow : 2.00 mm	Internal Method	1.8 %
Water absorption rate	Saturation, 23°C	ISO 62	0.080 %
Shrinkage rate	Flow : 2.00 mm	Internal Method	1.9 %
Melt Volume Flow Rate (MVR)	250°C/2.16 kg	ISO 1133	20.0 cm3/10min
thermal performance	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010N6-X3
Hot deformation temperature	1.8 MPa, Annealed	ISO 75-2/A	77.0 °C
Linear coefficient of thermal expansion	Flow : -30 to 35°C	ISO 11359-2	8.0E-5 cm/cm/°C
RTI Elec	0.71 mm	UL 746	140 °C
Hot deformation temperature	0.45 MPa, Annealed	ISO 75-2/B	165 °C
Linear coefficient of thermal expansion	Across Flow : 35 to 120°C	ISO 11359-2	1.5E-4 cm/cm/°C
		Across Flow : -30 to 120°C	ISO 11359-2	1.2E-4 cm/cm/°C
		Flow : -30 to 120°C	ISO 11359-2	1.2E-4 cm/cm/°C
RTI Imp	0.71 mm	UL 746	120 °C
Linear coefficient of thermal expansion	Flow : 35 to 120°C	ISO 11359-2	1.4E-4 cm/cm/°C
RTI	0.71 mm	UL 746	140 °C
Melting temperature		ISO 11357-3	224 °C
Linear coefficient of thermal expansion	Across Flow : -30 to 35°C	ISO 11359-2	8.8E-5 cm/cm/°C
Electrical performance	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010N6-X3
Compared to the anti leakage trace index		UL 746	PLC 1
Dielectric strength	1.00 mm	IEC 60243-1	21 KV/mm
Volume resistivity		IEC 60093	1.0E+16 ohms·cm
Dissipation factor	1 MHz	IEC 60250	0.020
Surface resistivity		IEC 60093	1.0E+15 ohms
Dielectric strength	2.00 mm	IEC 60243-1	18 KV/mm
Dielectric constant	1 MHz	IEC 60250	3.20
flammability	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010N6-X3
UL flame retardant rating	0.71 mm	UL 94	V-0
		1.5 mm	UL 94	V-0
		3.0 mm	UL 94	V-0
impact performance	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/5010N6-X3
Impact strength of simply supported beam without notch	23°C	ISO 179	120 kJ/m²

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index