Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEI AUT200 BK SABIC INNOVATIVE US
ULTEM™
Electrical appliances、Automotive Applications
High mobility、High transparency、high definition
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/AUT200 BK |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 3.0 kJ/m² |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 33.0 J |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 5.0 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | NoBreak |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 5.0 kJ/m² |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | NoBreak |
| Supplementary Information | Test Condition | Test Method | SABIC INNOVATIVE US/AUT200 BK |
|---|---|---|---|
| Metallic haze | 起始 | 内部方法 | 204 °C |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/AUT200 BK |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 3200 Mpa | |
| tensile strength | 断裂 | ISO 527-2/5 | 85.0 Mpa |
| elongation | 屈服 | ASTM D638 | 7.0 % |
| Tensile strain | 屈服 | ISO 527-2/5 | 6.0 % |
| tensile strength | 断裂 | ASTM D638 | 105 Mpa |
| Flexural modulus | 50.0mm跨距 | ASTM D790 | 3520 Mpa |
| tensile strength | 屈服 | ISO 527-2/5 | 105 Mpa |
| Tensile modulus | ASTM D638 | 3590 Mpa | |
| elongation | 断裂 | ASTM D638 | 60 % |
| bending strength | 屈服,50.0mm跨距 | ASTM D790 | 165 Mpa |
| ISO 178 | 160 Mpa | ||
| Flexural modulus | ISO 178 | 3300 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/5 | 60 % |
| tensile strength | 屈服 | ASTM D638 | 110 Mpa |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/AUT200 BK |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.50-0.70 % |
| Melt volume flow rate | 360°C/5.0kg | ISO 1133 | 25.0 cm3/10min |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.70 % |
| 饱和,23°C | ISO 62 | 1.3 % | |
| melt mass-flow rate | 337°C/6.6kg | ASTM D1238 | 18 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/AUT200 BK |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 199 °C |
| vicat | -- | ISO 306/B120 | 212 °C |
| Linear coefficient of thermal expansion | TD：23to150°C | ISO 11359-2 | 5E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 205 °C |
| vicat | -- | ISO 306/B50 | 211 °C |
| ASTM D152511 | 219 °C | ||
| Linear coefficient of thermal expansion | MD：-40to150°C | ASTME831 | 5.5E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火,100mm跨距9，HDT | ISO 75-2/Ae | 190 °C |
| Linear coefficient of thermal expansion | TD：-40to150°C | ASTME831 | 5.5E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 197 °C |
| 1.8MPa,未退火,64.0mm跨距10，HDT | ISO 75-2/Af | 193 °C | |
| Linear coefficient of thermal expansion | MD：23到150°C | ISO 11359-2 | 5E-05 cm/cm/°C |
Contact Us
Get App
Top