Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT T843FR NC010 DUPONT USA
Cristin®
Electronic and electrical components
Glass fiber reinforced,Flame retardant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | DUPONT USA/T843FR NC010 |
---|---|---|---|
Hot deformation temperature | 8.0MPa,Unannealed | ISO 75-2/C | 120 °C |
1.8MPa,Unannealed | ISO 75-2/A | 180 °C | |
Melting temperature | ISO 11357-3 | 205 °C | |
Vicat softening temperature | ISO 306/B50 | 185 °C |
mechanical properties | Test Condition | Test Method | DUPONT USA/T843FR NC010 |
---|---|---|---|
Tensile creep modulus | 1hr | ISO 899-1 | 5400 Mpa |
1000hr | ISO 899-1 | 3500 Mpa | |
Tensile modulus | ISO 527-2 | 5800 Mpa | |
Tensile strain | Break | ISO 527-2 | 4.2 % |
tensile strength | Break | ISO 527-2 | 90.0 Mpa |
Electrical performance | Test Condition | Test Method | DUPONT USA/T843FR NC010 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 2 | |
Dielectric strength | IEC 60243-1 | 27 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 0.017 |
100Hz | IEC 60250 | 0.012 | |
Relative permittivity | 100Hz | IEC 60250 | 4.10 |
1MHz | IEC 60250 | 3.90 | |
Surface resistivity | IEC 60093 | 1E+14 ohms | |
Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
Physical properties | Test Condition | Test Method | DUPONT USA/T843FR NC010 |
---|---|---|---|
MediumDensity | 1.32 g/cm³ | ||
Melt Volume Flow Rate (MVR) | 250°C/2.16kg | ISO 1133 | 10.0 cm3/10min |
Shrinkage rate | MD | ISO 294-4 | 0.40 % |
TD | ISO 294-4 | 1.0 % | |
SpecificHeatCapacity of Melt | 1850 J/kg/°C | ||
ThermalConductivityofMelt | 0.25 W/m/K | ||
Top out temperature | 150 °C | ||
Water absorption rate | Equilibrium,23°C,2.00mm,50%RH | ISO 62 | 0.15 % |
Saturation,23°C,2.00mm | ISO 62 | 0.30 % |
impact performance | Test Condition | Test Method | DUPONT USA/T843FR NC010 |
---|---|---|---|
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 60 kJ/m² |
23°C | ISO 179/1eU | 55 kJ/m² |
flammability | Test Condition | Test Method | DUPONT USA/T843FR NC010 |
---|---|---|---|
Extreme Oxygen Index | ISO 4589-2 | 30 % | |
FMVSS flammability | FMVSS302 | DNI | |
UL flame retardant rating | 3.0mm | IEC 60695-11-10,-20 | V-0 |
3.0mm | UL 94 | V-0 | |
1.5mm | IEC 60695-11-10,-20 | V-0 | |
1.5mm | UL 94 | V-0 |