Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LDPE NA112-27 USI TAIWAN
PAXOTHENE®
Blown film、film、For blowing out thin film
Extrusion level
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | USI TAIWAN/NA112-27 |
|---|---|---|---|
| ASTM D-1894 | 0.20/0.16 μS/μK | ||
| gloss | 60℃ | ASTM D-523 | 100 % |
| Shore hardness | ASTM D-2240 | 52 D | |
| spray | ASTM D-1003 | 6.0 % | |
| Melting point | ASTM D-2117 | 108 °C |
| Basic performance | Test Condition | Test Method | USI TAIWAN/NA112-27 |
|---|---|---|---|
| density | ASTM D-1505 | 0.921 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 3 g/10min |
| Mechanical properties | Test Condition | Test Method | USI TAIWAN/NA112-27 |
|---|---|---|---|
| Tensile strength at the point of surrender | 薄膜DM/DT | ASTM D-882 | 91/91 kg/cm |
| Tensile strength at fracture point | 铸模成型 | ASTM D-638 | 125 kg/cm |
| ductility | 薄膜DM/DT | ASTM D-882 | 340/550 % |
| 铸模成型 | ASTM D-638 | 440 % | |
| Tensile strength at fracture point | 薄膜DM/DT | ASTM D-882 | 190/154 kg/cm |
| Impact Strength | ASTM D-1709 | 110 G/50F | |
| Tensile strength at the point of surrender | 铸模成型 | ASTM D-638 | 105 kg/cm |
| Thermal performance | Test Condition | Test Method | USI TAIWAN/NA112-27 |
|---|---|---|---|
| vicat | ASTM D-1525 | 100 °C |
Contact Us
Get App
Top