plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
EPDM S552 SK KOREA
SUPRENE® 
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodSK KOREA/S552
Shore hardnessShoreDASTM D224059
Supplementary InformationTest ConditionTest MethodSK KOREA/S552
HalogenAcidGasEvolutionIEC 60754-10.0 %
thermal performanceTest ConditionTest MethodSK KOREA/S552
Hot pressing test90°CIEC 60811-3-135 %
mechanical propertiesTest ConditionTest MethodSK KOREA/S552
Elongation at Breakafter7days,inIRM903Oil:23°C160 %
after4hours,inSAE20Oil:70°C180 %
after7days,inIRM902Oil:23°C220 %
after4hours,inIRM902Oil:70°C210 %
Tensile strainBreakIEC 60811-1-1200 %
Break3IEC 60811-1-2170 %
Break2IEC 60811-1-2170 %
tensile strengthafter4hours,inIRM902Oil:70°C13.5 Mpa
--2IEC 60811-1-215.0 Mpa
--3IEC 60811-1-217.0 Mpa
--IEC 60811-1-114.0 Mpa
after7days,inIRM902Oil:23°C14.5 Mpa
after4hours,inSAE20Oil:70°C13.5 Mpa
after7days,inIRM903Oil:23°C12.5 Mpa
Physical propertiesTest ConditionTest MethodSK KOREA/S552
melt mass-flow rate150°C/21.6kgISO 11335.5 g/10min
flammabilityTest ConditionTest MethodSK KOREA/S552
Acid gas releaseIEC 60754-24.00 µS/cm
pHIEC 60754-25.70
Combustion temperature indexISO 4589-3280 °C
Extreme Oxygen IndexISO 4589-236 %
smoke densityNon-flamingmodeASTME662<140 Ds
FlamingmodeASTME662<60 Ds
toxicityNES7130.600
agingTest ConditionTest MethodSK KOREA/S552
Change rate of tensile strength in air70°C,4hr,inSAE20Oil-5.0 %
70°C,4hr,inIRM902Oil-5.0 %
23°C,168hr,inIRM902Oil5.0 %
110°C,168hr20 %
70°C,168hr,inWaterBS646999.1-12 %
23°C,168hr,inIRM903Oil-10 %
100°C,168hr5.0 %
Tensile stress change rate70°C,168hr,inWater,BreakBS646999.1-5.0 %
23°C,168hr,inIRM903Oil,Break-20 %
23°C,168hr,inIRM902Oil,Break10 %
110°C,168hr,Break-15 %
70°C,4hr,inIRM902Oil,Break5.0 %
70°C,4hr,inSAE20Oil,Break-10 %
100°C,168hr,Break-15 %
elastomerTest ConditionTest MethodSK KOREA/S552
tear strengthBS646999.18.00 kN/m