Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 Adell Polyamide BY-10 ADELL USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ADELL USA/Adell Polyamide BY-10 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 43 J/m |
| hardness | Test Condition | Test Method | ADELL USA/Adell Polyamide BY-10 |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 81 |
| R级 | ASTM D785 | 122 |
| Electrical performance | Test Condition | Test Method | ADELL USA/Adell Polyamide BY-10 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 4.5E+15 ohms·cm | |
| dielectric strength | ASTM D149 | 19 kV/mm |
| Mechanical properties | Test Condition | Test Method | ADELL USA/Adell Polyamide BY-10 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 6.0 % |
| bending strength | 屈服 | ASTM D790 | 150 MPa |
| compressive strength | ASTM D695 | 193 MPa | |
| Flexural modulus | ASTM D790 | 5170 MPa | |
| tensile strength | 屈服 | ASTM D638 | 95.1 MPa |
| physical property | Test Condition | Test Method | ADELL USA/Adell Polyamide BY-10 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.80to1.1 % |
| Water absorption rate | 24hr | ASTM D570 | 0.80 % |
| density | ASTM D792 | 1.48 g/cm³ |
| Thermal performance | Test Condition | Test Method | ADELL USA/Adell Polyamide BY-10 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 132 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 204 °C | |
| 熔融温度，HDT | ASTM D648 | 210to221 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 4.5E-05 cm/cm/°C |
Contact Us
Get App
Top