Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC/PBT UT6005 901510 COVESTRO GERMANY

Makroblend®

electrical equipment,transport,electronic product,Communication Applications

Low temperature resistanc,Creep resistance,Resistance to stress crac

Plastic Datasheets

hardness	Test Condition	Test Method	COVESTRO GERMANY/UT6005 901510
Ball Pressure Test		ISO 2039-1	108 Mpa

thermal performance	Test Condition	Test Method	COVESTRO GERMANY/UT6005 901510
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	110 °C
Hot deformation temperature		1.8MPa,Unannealed	ISO 75-2/A	85.0 °C
Linear coefficient of thermal expansion	MD：23to55°C	ISO 11359-2	9E-05 cm/cm/°C
Linear coefficient of thermal expansion		TD：23to55°C	ISO 11359-2	9E-05 cm/cm/°C
thermal conductivity	23°C	ISO 8302	0.20 W/m/K
Vicat softening temperature		ISO 306/B120	126 °C

mechanical properties	Test Condition	Test Method	COVESTRO GERMANY/UT6005 901510
Bending modulus	23°C	ISO 178	2150 Mpa
Bending strain	23°C	ISO 178	6.0 %
bending strength	23°C	ISO 178	80.0 Mpa
bending strength		3.5%Strain,23°C	ISO 178	70.0 Mpa
Nominal tensile fracture strain	23°C	ISO 527-2/50	>50 %
Tensile modulus	23°C	ISO 527-2/1	2200 Mpa
Tensile strain	Yield,23°C	ISO 527-2/50	5.0 %
tensile strength	Break,23°C	ISO 527-2/50	50.0 Mpa
tensile strength		Yield,23°C	ISO 527-2/50	60.0 Mpa

Electrical performance	Test Condition	Test Method	COVESTRO GERMANY/UT6005 901510
Compared to the anti leakage trace index	SolutionB	IEC 60112	V
Compared to the anti leakage trace index		SolutionA	IEC 60112	PLC 0
Dielectric strength	23°C,1.00mm	IEC 60243-1	30 KV/mm
Dissipation factor	23°C,100Hz	IEC 60250	7E-04
Dissipation factor		23°C,1MHz	IEC 60250	4.5E-03
Relative permittivity	23°C,1MHz	IEC 60250	3.00
Relative permittivity		23°C,100Hz	IEC 60250	3.20
Surface resistivity		IEC 60093	>1.0E+17 ohms
Volume resistivity	23°C	IEC 60093	>1.0E+17 ohms·cm

Physical properties	Test Condition	Test Method	COVESTRO GERMANY/UT6005 901510
Apparent density		ISO 60	0.65 g/cm³
Melt Volume Flow Rate (MVR)	260°C/5.0kg	ISO 1133	18.0 cm3/10min
Shrinkage rate	TD:90°C,1hr	ISO 2577	0.10-0.20 %
		TD2	ISO 2577	0.70-0.90 %
		MD:90°C,1hr	ISO 2577	0.10-0.20 %
		MD2	ISO 2577	0.70-0.90 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.20 %
Water absorption rate		Saturation,23°C	ISO 62	0.50 %

impact performance	Test Condition	Test Method	COVESTRO GERMANY/UT6005 901510
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	NoBreak
Multi axis Instrumented Impact Energy	-30°C	ISO 6603-2	58.0 J
Multi axis Instrumented Impact Energy		23°C	ISO 6603-2	47.0 J
Multi axis Instrumented Peak Impact Force	-30°C	ISO 6603-2	5000 N
Multi axis Instrumented Peak Impact Force		23°C	ISO 6603-2	3800 N
Suspended wall beam without notch impact strength	-30°C	ISO 180	NoBreak
Suspended wall beam without notch impact strength		23°C	ISO 180	NoBreak

flammability	Test Condition	Test Method	COVESTRO GERMANY/UT6005 901510
Burning wire flammability index	2.0mm	IEC 60695-2-12	750 °C
Extreme Oxygen Index		ISO 4589-2	21 %
UL flame retardant rating	1.6mm	UL 94	HB

Get App

Top