Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PBT 420-7001 SABIC INNOVATIVE THAILAND

VALOX™

Lawn equipment,Garden equipment,Industrial applications,Automotive External Parts,Electrical field,Electronic field,Architectural application field,Outdoor applications,Electrical appliances,Engine hood parts,Medical supplies,Nursing supplies,Plastic bag,Automotive interior parts,Casters,Household goods,Petroleum Applications,Natural gas supplies,sporting goods,Textile application,Lighting applications

Glass fiber reinforced,dimensional stability ,High rigidity,high strength,heat-resisting

Plastic Datasheets

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE THAILAND/420-7001
Bending modulus	50.0mmSpan	ASTM D790	7580 Mpa
Bending modulus			ISO 178	8500 Mpa
bending strength	Yield,50.0mmSpan	ASTM D790	195 Mpa
			ISO 178	195 Mpa
		Break,50.0mmSpan	ASTM D790	190 Mpa
Taber abraser	1000Cycles,1000g,CS-17Wheel	ASTM D1044	19.0 mg
Tensile modulus		ASTM D638	9300 Mpa
Tensile modulus			ISO 527-2/1	9300 Mpa
Tensile strain	Yield	ASTM D638	2.7 %
		Yield	ISO 527-2/5	2.0 %
		Break	ASTM D638	2.7 %
tensile strength	Break	ISO 527-2/5	125 Mpa
		Yield	ASTM D638	120 Mpa
		Break	ASTM D638	120 Mpa

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE THAILAND/420-7001
density		ASTM D792	1.53 g/cm³
melt mass-flow rate	250°C/2.16kg	ISO 1133	17 g/10min
Shrinkage rate	TD：--2	Internal Method	0.50-1.0 %
		MD：--4	Internal Method	0.50-0.80 %
		MD：3.20mm	Internal Method	0.30-0.80 %
		MD：--2	Internal Method	0.30-0.70 %
		MD：--3	Internal Method	0.30-0.50 %
		TD：--3	Internal Method	0.40-0.60 %
		TD：--5	Internal Method	0.60-0.90 %
Specific volume		ASTM D792	0.660 cm³/g
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.080 %
Water absorption rate		24hr	ASTM D570	0.090 %

impact performance	Test Condition	Test Method	SABIC INNOVATIVE THAILAND/420-7001
Charpy Notched Impact Strength	23°C	ISO 179/1eA	5.0 kJ/m²
Charpy Notched Impact Strength		-30°C	ISO 179/1eA	5.0 kJ/m²
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	7.0 kJ/m²
		23°C	ISO 180/1A	8.0 kJ/m²
		-30°C	ASTM D256	80 J/m
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	45 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	45 kJ/m²
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	45 kJ/m²

Get App

Top