Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TPEE EL250 DSM HOLAND
Arnitel®
sporting goods,Fitness equipment
Thermal stability,Aging resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | DSM HOLAND/EL250 |
|---|---|---|---|
| Shore hardness | ShoreD,3Sec | ISO 868 | 25 |
| thermal performance | Test Condition | Test Method | DSM HOLAND/EL250 |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 2.2E-04 cm/cm/°C |
| MD | ISO 11359-2 | 2.2E-04 cm/cm/°C | |
| Melting temperature | ISO 11357-3 | 180 °C |
| mechanical properties | Test Condition | Test Method | DSM HOLAND/EL250 |
|---|---|---|---|
| Nominal tensile fracture strain | ISO 527-2 | 900 % | |
| Tensile modulus | ISO 527-2 | 25.0 Mpa | |
| tensile strength | 5.0%Strain | ISO 527-2 | 1.20 Mpa |
| 50%Strain | ISO 527-2 | 4.40 Mpa | |
| 10%Strain | ISO 527-2 | 2.10 Mpa | |
| 100%Strain | ISO 527-2 | 5.10 Mpa | |
| Break | ISO 527-2 | 16.0 Mpa |
| Electrical performance | Test Condition | Test Method | DSM HOLAND/EL250 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 5E+14 ohms·cm |
| Physical properties | Test Condition | Test Method | DSM HOLAND/EL250 |
|---|---|---|---|
| Apparent density | ISO 60 | 0.65 g/cm³ | |
| Melt Volume Flow Rate (MVR) | 230°C/2.16kg | ISO 1133 | 41.0 cm3/10min |
| Water absorption rate | Saturation,23°C | ISO 62 | 0.80 % |