Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

POM F30-02 E9000 MITSUBISHI ENGINEERING JAPAN

Iupital™

Automotive sector,Thin walled components,Application in the automotive field,Electrical components,Thin walled components,Electronic data processing

wear resistant,Chemical resistance,Thermal stability,Anti creep,Good liquidity,Good forming performance,Low viscosity

Plastic Datasheets

hardness	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/F30-02 E9000
Rockwell hardness	M-Scale	ASTM D785	80

thermal performance	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/F30-02 E9000
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	110 °C
		Melting Temperature	ASTM D648	165 °C
		0.45MPa,Unannealed	ASTM D648	158 °C
Linear coefficient of thermal expansion	MD：20to80°C	ASTM D696	1.3E-04 cm/cm/°C

mechanical properties	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/F30-02 E9000
Bending modulus	23°C	ASTM D790	2650 Mpa
bending strength	23°C	ASTM D790	91.0 Mpa
elongation	Break,23°C	ASTM D638	40 %
shear strength	2.00mm	ASTM D732	55.0 Mpa
tensile strength	Yield,23°C	ASTM D638	62.0 Mpa

Electrical performance	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/F30-02 E9000
Dielectric constant	1MHz	ASTM D150	3.70
Dielectric strength		ASTM D149	19 KV/mm
Dissipation factor	1MHz	ASTM D150	7E-03
Surface resistivity		ASTM D257	1E+16 ohms
Volume resistivity		ASTM D257	1E+14 ohms·cm

Physical properties	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/F30-02 E9000
melt mass-flow rate		ASTM D1238	27 g/10min
Shrinkage rate	MD：3.00mm	ASTM D955	2.0 %
Water absorption rate	Equilibrium,23°C,60%RH	ASTM D570	0.22 %

flammability	Test Condition	Test Method	MITSUBISHI ENGINEERING JAPAN/F30-02 E9000
UL flame retardant rating	0.800mm	UL 94	HB

Get App

Top