Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE KS10100UE DOW USA
DOW™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | DOW USA/KS10100UE |
|---|---|---|---|
| spiral flow length | 2 seconds injection，25℃ | 内部方法 | 635 mm |
| Basic performance | Test Condition | Test Method | DOW USA/KS10100UE |
|---|---|---|---|
| melt mass-flow rate | 190℃/2.16kg | ISO 1133 | 4 g/10min |
| density | ASTM D-792 | 0.953 Mpa | |
| melt mass-flow rate | 190℃/5.0kg | ISO 1133 | 12 g/10min |
| Mechanical properties | Test Condition | Test Method | DOW USA/KS10100UE |
|---|---|---|---|
| tensile strength | 屈服,Compression Molded | ASTM D-638 | 25 Mpa |
| Flexural modulus | Compression Molded | ASTM D-790 | 850 Mpa |
| elongation at break | Compression Molded | ASTM D-638 | > 1600 % |
| Shore hardness | Shore D，Compression Molded | ISO 868 | 65 |
| Environmental stress cracking resistance | 50℃，100% Antarox，Compression Molded | ASTM D-1693 | 10 hr |
| tensile strength | Compression Molded，断裂 | ASTM D-638 | 27 Mpa |
| Impact strength of cantilever beam gap | Compression Molded | ASTM D-1822 | 85 KJ/m |
| physical property | Test Condition | Test Method | DOW USA/KS10100UE |
|---|---|---|---|
| Shrinkage rate | 250℃ | ASTM D-955 | 2.6 % |
| Thermal performance | Test Condition | Test Method | DOW USA/KS10100UE |
|---|---|---|---|
| vicat | ISO 306/A | 128 °C |
Contact Us
Get App
Top