Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS SERG1 DAICEL JAPAN
CEVIAN®
Decorative components、Shell、Suitable for exterior dec、Car charger、Injection molded products
Flame retardant、Glass fiber reinforced、Enhanced level、10% short glass fiber rei、Enhanced level、10% short glass fiber rei
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic performance | Test Condition | Test Method | DAICEL JAPAN/SERG1 |
---|---|---|---|
Water absorption rate | ISO 62 | 0.3 % | |
density | ISO 1183 | 1.30 |
Electrical performance | Test Condition | Test Method | DAICEL JAPAN/SERG1 |
---|---|---|---|
dielectric strength | 1.5mm | ASTM D-149 | 34 MV/m |
arc resistance | 3.0mm | ASTM D-495 | PLC_7 |
3.0mm | ASTM D-495 | 10 sec |
Mechanical properties | Test Condition | Test Method | DAICEL JAPAN/SERG1 |
---|---|---|---|
Impact strength of cantilever beam gap | -30℃,6.4mm | ASTM D-256 | 40 J/m |
tensile strength | ISO 527 | 75 Mpa | |
Rockwell hardness | ISO 2039 | R114 | |
bending strength | ISO 178 | 110 Mpa | |
Flexural modulus | ISO 178 | 4700 Mpa | |
Impact strength of cantilever beam gap | 23℃,6.4mm | ASTM D-256 | 80 J/m |
Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 8 KJ/m |
-30℃ | ISO 179/1eA | 5 KJ/m |
physical property | Test Condition | Test Method | DAICEL JAPAN/SERG1 |
---|---|---|---|
Shrinkage rate | ASTM D-955 | 0.2-0.5 % |
Thermal performance | Test Condition | Test Method | DAICEL JAPAN/SERG1 |
---|---|---|---|
Linear coefficient of thermal expansion | 流动方向 | ISO 11359 | 5 ×10 |
Heat distortion temperature | 1.80MPa,12.7mm,HDT | ISO 75/A | 86 °C |
vicat | 9.8N,50℃/h | ASTM D-1525 | 100 °C |
combustibility | UL 94 | V-0 | |
vicat | 50N,50℃/h | ISO 306/B50 | 91 °C |
Heat distortion temperature | 1.82MPa,12.7mm,HDT | ASTM D-648 | 94 °C |
Contact Us
Get App
Top