Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS AE002 SABIC INNOVATIVE US
LNP™ STAT-KON™
Electronic and electrical components
Conductive,enhance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/AE002 |
|---|---|---|---|
| Hot deformation temperature | 1.80MPaUnannealed | ASTM D648 | 101 °C |
| 0.45MPaUnannealed | ASTM D648 | 105 °C | |
| Linear coefficient of thermal expansion | TD | ASTM D696 | 8.3E-05 cm/cm/°C |
| MD | ASTM D696 | 3.3E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/AE002 |
|---|---|---|---|
| Bending modulus | 23°C | ASTM D790 | 6660 Mpa |
| bending strength | 23°C | ASTM D790 | 114 Mpa |
| Elongation at Break | 23°C | ASTM D638 | 1.5 % |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 48 J/m |
| Suspended wall beam without notch impact strength | 23°C | ASTM D4812 | 230 J/m |
| Tensile modulus | 23°C | ASTM D638 | 7650 Mpa |
| tensile strength | 23°C | ASTM D638 | 86 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/AE002 |
|---|---|---|---|
| Surface resistivity | ASTM D257 | 3 Ω.cm |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/AE002 |
|---|---|---|---|
| Shrinkage rate | TD | ASTM D995 | 0.3-0.5 % |
| MD | ASTM D995 | 0.2-0.4 % | |
| Water absorption rate | (23°C,50RH) | ASTM D570 | 0.23 % |