Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC Electrafil® J-50/CF/10 Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® J-50/CF/10 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 59 J/m |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® J-50/CF/10 |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 165 MPa |
| tensile strength | 23°C | ASTM D638 | 103 MPa |
| Tensile modulus | 23°C | ASTM D638 | 7580 MPa |
| Flexural modulus | 23°C | ASTM D790 | 7580 MPa |
| elongation | 断裂,23°C | ASTM D638 | 3.0 % |
| Electrical performance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® J-50/CF/10 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 5.5E+03 ohms·cm | |
| Surface Resistivity | ASTM D257 | 5.5E+05 ohms |
| flammability | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® J-50/CF/10 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-1 |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® J-50/CF/10 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.15 % |
| density | ASTM D792 | 1.24 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.15 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® J-50/CF/10 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 142 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 146 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3.2E-05 cm/cm/°C |
Contact Us
Get App
Top