Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

LCP S135 JAPAN POLYPLASTIC

LAPEROS®

Household appliances,Household appliances,Automotive sector,Electrical field,Electronic field,Switch panel,Engine hood parts,Laptop case

Glass fiber reinforced,High rigidity,High temperature resistan

ULMSDS

Plastic Datasheets

thermal performance	Test Condition	Test Method	JAPAN POLYPLASTIC/S135
Hot deformation temperature	8.0MPa,Unannealed	ISO 75-2/C	267 °C
		HDT	ASTM D648/ISO 75	340 ℃（℉）
		1.8MPa,Unannealed	ISO 75-2/A	340 °C
Linear coefficient of thermal expansion	TD	ISO 11359-2	2.3E-05 cm/cm/°C
Linear coefficient of thermal expansion		MD	ISO 11359-2	1E-06 cm/cm/°C
Melting temperature		ISO 11357-3	350 °C

mechanical properties	Test Condition	Test Method	JAPAN POLYPLASTIC/S135
Bending modulus	23°C	ISO 178	14500 Mpa
Bending modulus			ASTM D790/ISO 178	16000 kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	220 kg/cm²(MPa)[Lb/in²]
bending strength		23°C	ISO 178	230 Mpa
Charpy Notched Impact Strength		ASTM D256/ISO 179	12 kg·cm/cm(J/M)ft·lb/in
CompressiveStress	1%Strain	ISO 604	114 Mpa
Fracture bending strain		ISO 178	2.0 %
Tensile modulus		ISO 527-2/1A/1	15500 Mpa
Tensile strain	Break	ISO 527-2/1A/5	1.3 %
tensile strength	Break	ISO 527-2/1A/5	140 Mpa
tensile strength			ASTM D638/ISO 527	155 kg/cm²(MPa)[Lb/in²]

Electrical performance	Test Condition	Test Method	JAPAN POLYPLASTIC/S135
Arc resistance		ASTM D495/IEC 60112	138
Dielectric strength		IEC 60243-1	37 KV/mm
Dissipation factor	1MHz	IEC 60250	9E-03
Relative permittivity	1MHz	IEC 60250	3.50
Surface resistivity		IEC 60093	1E+17 ohms
Volume resistivity		IEC 60093	1E+17 ohms·cm

other	Test Condition	Test Method	JAPAN POLYPLASTIC/S135
characteristic			超高耐热.高温刚性.玻璃纤维.标准
Color			VF2001/BK010P

Physical properties	Test Condition	Test Method	JAPAN POLYPLASTIC/S135
density		ASTM D792/ISO 1183	1.66
Shrinkage rate	MD	ISO 294-4	0.10 %
Shrinkage rate		TD	ISO 294-4	0.40 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	7E-03 %
Water absorption rate		Saturation,23°C	ISO 62	4E-03 %

impact performance	Test Condition	Test Method	JAPAN POLYPLASTIC/S135
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	14 kJ/m²

flammability	Test Condition	Test Method	JAPAN POLYPLASTIC/S135
UL flame retardant rating		UL 94	V-0

Get App

Top