Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PES 3601GL20 SUMITOMO JAPAN
SUMIKAEXCEL®
--
Filler: Glass fiber reinf,20% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | SUMITOMO JAPAN/3601GL20 |
---|---|---|---|
Rockwell hardness | R-Scale | ASTM D785 | 134 |
thermal performance | Test Condition | Test Method | SUMITOMO JAPAN/3601GL20 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 210 °C |
Linear coefficient of thermal expansion | MD:-50to150°C | ASTM D696 | 2.6E-05 cm/cm/°C |
TD:50to150°C | ASTM D696 | 4.8E-05 cm/cm/°C |
mechanical properties | Test Condition | Test Method | SUMITOMO JAPAN/3601GL20 |
---|---|---|---|
Bending modulus | ASTM D790 | 5900 Mpa | |
bending strength | ASTM D790 | 172 Mpa | |
elongation | Break | ASTM D638 | 3.0 % |
tensile strength | ASTM D638 | 124 Mpa |
Electrical performance | Test Condition | Test Method | SUMITOMO JAPAN/3601GL20 |
---|---|---|---|
Arc resistance | ASTM D495 | 150 sec | |
Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
Physical properties | Test Condition | Test Method | SUMITOMO JAPAN/3601GL20 |
---|---|---|---|
Shrinkage rate | MD | ASTM D955 | 0.30 % |
TD | ASTM D955 | 0.40 % | |
Water absorption rate | 24hr | ASTM D570 | 0.36 % |
impact performance | Test Condition | Test Method | SUMITOMO JAPAN/3601GL20 |
---|---|---|---|
Suspended wall beam without notch impact strength | 6.40mm | ASTM D256 | 430 J/m |
flammability | Test Condition | Test Method | SUMITOMO JAPAN/3601GL20 |
---|---|---|---|
UL flame retardant rating | 0.43mm | UL 94 | V-0 |