Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/ABS FR3000 703003 COVESTRO GERMANY
Bayblend®
Electrical field、Electronic field、Household appliances、Household appliances、Automotive sector
Flame retardant、UV resistance、High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | COVESTRO GERMANY/FR3000 703003 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ISO 180/A | 30 kJ/m² |
| Mechanical properties | Test Condition | Test Method | COVESTRO GERMANY/FR3000 703003 |
|---|---|---|---|
| tensile strength | 屈服, 23°C | ISO 527-2/50 | 64.0 Mpa |
| Tensile modulus | 23°C | ISO 527-2/1 | 2650 Mpa |
| Nominal tensile fracture strain | 23°C | ISO 527-2/50 | 40 % |
| Tensile strain | 屈服, 23°C | ISO 527-2/50 | 3.9 % |
| Electrical performance | Test Condition | Test Method | COVESTRO GERMANY/FR3000 703003 |
|---|---|---|---|
| relative permittivity | 23°C, 1 MHz | IEC 60250 | 2.90 |
| Volume resistivity | 23°C | IEC 60093 | 1.0E+16 ohms·cm |
| relative permittivity | 23°C, 100 Hz | IEC 60250 | 3.00 |
| Surface Resistivity | IEC 60093 | 1.0E+16 ohms |
| flammability | Test Condition | Test Method | COVESTRO GERMANY/FR3000 703003 |
|---|---|---|---|
| UL flame retardant rating | 2.0 mm | UL 94 | 5VB |
| 1.5 mm | UL 94 | V-0 | |
| Limiting Oxygen Index | ISO 4589-2 | 34 % |
| Filling analysis | Test Condition | Test Method | COVESTRO GERMANY/FR3000 703003 |
|---|---|---|---|
| ISO 9660 | PC+ABS-FR(40) | ||
| melt viscosity | 240°C | ISO 11443-A | 150 Pa·s |
| physical property | Test Condition | Test Method | COVESTRO GERMANY/FR3000 703003 |
|---|---|---|---|
| Shrinkage rate | 流量 | ISO 2577 | 0.40 - 0.60 % |
| density | 23°C | ISO 1183 | 1.18 g/cm³ |
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 0.10 % |
| Melt volume flow rate | 240°C/5.0 kg | ISO 1133 | 20.0 cm3/10min |
| Shrinkage rate | 横向流量 | ISO 2577 | 0.40 - 0.60 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 0.40 % |
| Thermal performance | Test Condition | Test Method | COVESTRO GERMANY/FR3000 703003 |
|---|---|---|---|
| Heat distortion temperature | 0.45 MPa, 未退火，HDT | ISO 75-2/B | 95.0 °C |
| vicat | ISO 306/B120 | 103 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/A | 85.0 °C |
| injection | Test Condition | Test Method | COVESTRO GERMANY/FR3000 703003 |
|---|---|---|---|
| Suggested maximum moisture content | < 0.020 % | ||
| Drying time - Dry Air Dryer | 4.0 hr | ||
| Temperature in the middle of the barrel | 225 to 235 °C | ||
| Temperature at the rear of the barrel | 220 to 230 °C | ||
| Processing (melt) temperature | 240 to 270 °C | ||
| Exhaust hole depth | 0.025 to 0.075 mm | ||
| Suggested injection volume | 30 to 70 % | ||
| Temperature at the front of the material cylinder | 230 to 240 °C | ||
| Back pressure | 5.00 to 15.0 Mpa | ||
| Drying Temperature - Dry Air Dryer | 80 °C | ||
| Temperature | 60 to 90 °C | ||
| Spray nozzle temperature | 255 to 265 °C |
Contact Us
Get App
Top