Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PAEK AV-742 SL30 SOLVAY BELGIUM
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SOLVAY BELGIUM/ AV-742 SL30 |
|---|---|---|---|
| Impact strength of cantilever beam gap | -- | ISO 180 | 5.8 kJ/m² |
| Suspended wall beam without notch impact strength | -- | ASTM D4812 | 410 J/m |
| Impact strength of cantilever beam gap | -- | ASTM D256 | 53 J/m |
| Suspended wall beam without notch impact strength | -- | ISO 180 | 28 kJ/m² |
| hardness | Test Condition | Test Method | SOLVAY BELGIUM/ AV-742 SL30 |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 87 |
| Mechanical properties | Test Condition | Test Method | SOLVAY BELGIUM/ AV-742 SL30 |
|---|---|---|---|
| bending strength | -- | ASTM D790 | 211 MPa |
| elongation | 断裂3 | ASTM D638 | 1.8 % |
| Tensile modulus | -- | ISO 527-2/1A/1 | 15500 MPa |
| tensile strength | --3 | ASTM D638 | 143 MPa |
| compressive strength | ASTM D695 | 121 MPa | |
| Flexural modulus | -- | ISO 178 | 13200 MPa |
| bending strength | -- | ISO 178 | 203 MPa |
| elongation | 断裂 | ISO 527-2/1A/5 | 1.8 % |
| tensile strength | 屈服 | ISO 527-2/1A/5 | 156 MPa |
| Flexural modulus | -- | ASTM D790 | 10400 MPa |
| Tensile modulus | --3 | ASTM D638 | 13000 MPa |
| shear strength | ASTM D732 | 70.0 MPa |
| Filling analysis | Test Condition | Test Method | SOLVAY BELGIUM/ AV-742 SL30 |
|---|---|---|---|
| melt viscosity | 400°C,1000sec^-1 | 270 Pa·s |
| physical property | Test Condition | Test Method | SOLVAY BELGIUM/ AV-742 SL30 |
|---|---|---|---|
| melt mass-flow rate | 400°C/2.16kg | ASTM D1238 | 2.5 g/10min |
| Shrinkage rate | TD:3.18mm | ASTM D955 | 1.6to1.8 % |
| Water absorption rate | 24hr | ASTM D570 | 0.030 % |
| Shrinkage rate | MD:3.18mm | ASTM D955 | 0.10to0.30 % |
| density | ASTM D792 | 1.47 g/cm³ |
| Thermal performance | Test Condition | Test Method | SOLVAY BELGIUM/ AV-742 SL30 |
|---|---|---|---|
| thermal conductivity | ASTME1530 | 0.34 W/m/K | |
| Linear coefficient of thermal expansion | MD：-50到50°C | ASTME831 | 1E-05 cm/cm/°C |
| specific heat | 50°C | DSC | 1250 J/kg/°C |
| Heat distortion temperature | 1.8MPa,退火，HDT | ASTM D648 | 276 °C |
| specific heat | 200°C | DSC | 1710 J/kg/°C |
| melting temperature | ASTM D3418 | 343 °C | |
| Glass Transition Temperature | ASTM D3418 | 152 °C |
Contact Us
Get App
Top