Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LDPE HP4024W SABIC SAUDI
SABIC®
Laundry bag、film、chip
low density、Low friction coefficient、Smoothness、optical performance 、Anti caking property、Food contact compliance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | SABIC SAUDI/HP4024W |
|---|---|---|---|
| Blow-upRatio | 2.00到3.00 |
| film | Test Condition | Test Method | SABIC SAUDI/HP4024W |
|---|---|---|---|
| elongation | TD:断裂,50µm,吹塑薄膜 | ISO527-3 | 600 % |
| Tensile stress | TD:断裂,50µm,吹塑薄膜 | ISO527-3 | 16.0 Mpa |
| Film thickness - tested | 50 µm | ||
| elongation | MD:断裂,50µm,吹塑薄膜 | ISO527-3 | 300 % |
| Falling hammer impact | 50µm,吹塑薄膜 | ASTMD1709 | 100 g |
| Available film thickness | 15-40micron | ||
| Tensile stress | MD:断裂,50µm,吹塑薄膜 | ISO527-3 | 19.0 Mpa |
| Mechanical properties | Test Condition | Test Method | SABIC SAUDI/HP4024W |
|---|---|---|---|
| Tensile modulus | 0.0500mm | ISO527-2 | 260 Mpa |
| Tensile stress | 屈服,0.0500mm | ISO527-2 | 11.0 Mpa |
| ISO8295 | <20 % |
| optical performance | Test Condition | Test Method | SABIC SAUDI/HP4024W |
|---|---|---|---|
| Haze ratio | 50.0µm,吹塑薄膜 | ASTMD1003 | <9.0 % |
| gloss | 20°,50.0µm,吹塑薄膜 | ASTMD2457 | >50 |
| 60°,50.0µm,吹塑薄膜 | ASTMD2457 | >100 |
| physical property | Test Condition | Test Method | SABIC SAUDI/HP4024W |
|---|---|---|---|
| density | 23°C | ISO1183 | 0.923 g/cm³ |
| melt mass-flow rate | 190°C/2.16kg | ISO1133 | 4.0 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC SAUDI/HP4024W |
|---|---|---|---|
| vicat | ISO306/A50 | 92.0 °C | |
| ISO3146 | 111 °C |
Contact Us
Get App
Top