Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 22HSP BK ASCEND USA
Vydyne®
Industrial applications、Electrical applications、Automotive Applications、Industrial machinery、Fitness equipment、Injection molding applica
Chemical resistance、High rigidity、wear resistant、Oil resistant、high strength、Thermal stability、High toughness、High liquidity、toughness、Chemical resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | ASCEND USA/22HSP BK |
|---|---|---|---|
| Charpy notch impact strength | -，-30℃ | ISO 179 | 5.3 kJ/m² |
| bending strength | ISO 178 | 35 Mpa | |
| Flexural modulus | ISO 178 | 2900 Mpa | |
| Yield tensile strength | ISO 527 | 83 Mpa | |
| Charpy notch impact strength | -，23℃ | ISO 179 | 6.6 kJ/m² |
| elongation | 断裂 | ISO 527 | 40 % |
| Tensile modulus | ISO 527 | 3000 Mpa |
| Electrical performance | Test Condition | Test Method | ASCEND USA/22HSP BK |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 4 ohm-cm×1015 | |
| Dielectric Strength | IEC 60243 | 20 KV/mm |
| physical property | Test Condition | Test Method | ASCEND USA/22HSP BK |
|---|---|---|---|
| Mold shrinkage rate | -，2mm,平行 | ISO 294-4 | 1.4 % |
| Water absorption rate | -，23℃,50%湿度 | ISO 62 | 2.4 % |
| -，23℃,24hrs | ISO 62 | 1.1 % | |
| density | ISO 1183 | 1.14 g/cm³ | |
| Mold shrinkage rate | -，2mm,垂直 | ISO 294-4 | 1.6 % |
| Thermal performance | Test Condition | Test Method | ASCEND USA/22HSP BK |
|---|---|---|---|
| Heat distortion temperature | -，0.45MPa | ISO 75 | 200 °C |
| Flame retardancy | UL94 | V-2 | |
| Heat distortion temperature | -，1.82MPa | ISO 75 | 70 °C |
| melting point | ISO 3146 | 260 °C |
Contact Us
Get App
Top