Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA11/TPE 80R53 SP 02 ARKEMA USA
Pebax®Rnew®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ARKEMA USA/80R53 SP 02 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | -- |
| 23°C | ISO 179/1eU | -- |
| hardness | Test Condition | Test Method | ARKEMA USA/80R53 SP 02 |
|---|---|---|---|
| Supporting hardness | 邵氏 D, 15 秒 | ISO 7619-1 | 67 |
| Mechanical properties | Test Condition | Test Method | ARKEMA USA/80R53 SP 02 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | -- Mpa | |
| Nominal tensile fracture strain | ISO 527-2 | -- % | |
| Tensile stress | 屈服 | ISO 527-2 | -- Mpa |
| Tensile strain | 屈服 | ISO 527-2 | -- % |
| squeeze out | Test Condition | Test Method | ARKEMA USA/80R53 SP 02 |
|---|---|---|---|
| drying temperature | 70 到 80 °C | ||
| drying time | 5.0 到 7.0 hr | ||
| Melt Temperature | 230 到 290 °C |
| physical property | Test Condition | Test Method | ARKEMA USA/80R53 SP 02 |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 0.80 % |
| 饱和, 23°C | ISO 62 | 0.70 % |
| Thermal performance | Test Condition | Test Method | ARKEMA USA/80R53 SP 02 |
|---|---|---|---|
| Melting temperature 2 | ISO 11357-3 | 188 °C | |
| Renewable Carbon Conent | CSA LISTED | 93 到 97 % |
| injection | Test Condition | Test Method | ARKEMA USA/80R53 SP 02 |
|---|---|---|---|
| Temperature | 25 到 60 °C | ||
| Processing (melt) temperature | 230 到 290 °C | ||
| drying temperature | 70 到 80 °C | ||
| drying time | 5.0 到 7.0 hr |
Contact Us
Get App
Top