Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC LGS-2410M MITSUBISHI ENGINEERING JAPAN
IUPILON™
Fiber grade
enhance,wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LGS-2410M |
---|---|---|---|
bending strength | ASTM D790/ISO 178 | 116 kg/cm²(MPa)[Lb/in²] | |
Flexural modulus | ASTM D790/ISO 178 | 4000 kg/cm²(MPa)[Lb/in²] | |
Tensile modulus | ASTM D638/ISO 527 | 4100 kg/cm²(MPa)[Lb/in²] | |
tensile strength | ASTM D638/ISO 527 | 67.0 kg/cm²(MPa)[Lb/in²] |
other | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LGS-2410M |
---|---|---|---|
characteristic | 耐磨损性能良好 | ||
notes | 以上加工数据.为参考值.以生产厂商设备的实际状况而进行调整 |
Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LGS-2410M |
---|---|---|---|
Shrinkage rate | ASTM D955 | 0.40-0.60 % | |
Water absorption rate | ASTM D570/ISO 62 | 0.080 % |
Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LGS-2410M |
---|---|---|---|
Heat distortion temperature | HDT | ASTM D648/ISO 75 | 148 ℃(℉) |
Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.000068 mm/mm.℃ |
Contact Us
Get App
Top