Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO(PPE) Norylux™ 30% GF Westlake Plastics Company
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Westlake Plastics Company/Norylux™ 30% GF |
|---|---|---|---|
| Impact strength of cantilever beam gap | -40°C | ASTM D256 | 96 J/m |
| 23°C | ASTM D256 | 110 J/m |
| hardness | Test Condition | Test Method | Westlake Plastics Company/Norylux™ 30% GF |
|---|---|---|---|
| Rockwell hardness | L计秤 | ASTM D785 | 106 |
| Electrical performance | Test Condition | Test Method | Westlake Plastics Company/Norylux™ 30% GF |
|---|---|---|---|
| Dissipation Factor | 60Hz | ASTM D150 | 1.6E-03 |
| dielectric constant | 60Hz | ASTM D150 | 3.15 |
| dielectric strength | ASTM D149 | 24 kV/mm |
| Mechanical properties | Test Condition | Test Method | Westlake Plastics Company/Norylux™ 30% GF |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 5.0 % |
| bending strength | 屈服 | ASTM D790 | 152 MPa |
| Flexural modulus | ASTM D790 | 5720 MPa | |
| tensile strength | 屈服 | ASTM D638 | 107 MPa |
| flammability | Test Condition | Test Method | Westlake Plastics Company/Norylux™ 30% GF |
|---|---|---|---|
| UL flame retardant rating | 6.0mm | UL 94 | V-0 |
| 1.5mm | UL 94 | V-1 |
| physical property | Test Condition | Test Method | Westlake Plastics Company/Norylux™ 30% GF |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.060 % |
| density | ASTM D792 | 1.23 g/cm³ |
| Thermal performance | Test Condition | Test Method | Westlake Plastics Company/Norylux™ 30% GF |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 132 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 138 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 2.5E-05 cm/cm/°C |
Contact Us
Get App
Top