Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS ABS 20 GF15 Bada AG
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Bada AG/ABS 20 GF15 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 5.0 kJ/m² |
| -30°C | ISO 179/1eA | 4.0 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 25 kJ/m² |
| -30°C | ISO 179/1eU | 20 kJ/m² |
| Electrical performance | Test Condition | Test Method | Bada AG/ABS 20 GF15 |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 37 kV/mm | |
| Volume resistivity | IEC 60093 | 1E+13 ohms·cm | |
| relative permittivity | 1MHz | IEC 60250 | 2.80 |
| Surface Resistivity | IEC 60093 | 1E+13 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 7.9E-03 |
| Mechanical properties | Test Condition | Test Method | Bada AG/ABS 20 GF15 |
|---|---|---|---|
| Tensile strain | 断裂,23°C | ISO 527-2/5 | 2.0 % |
| tensile strength | 断裂,23°C | ISO 527-2/5 | 85.0 MPa |
| Tensile modulus | 23°C | ISO 527-2/1 | 6000 MPa |
| flammability | Test Condition | Test Method | Bada AG/ABS 20 GF15 |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Bada AG/ABS 20 GF15 |
|---|---|---|---|
| Melt volume flow rate | 220°C/10.0kg | ISO 1133 | 10.0 cm³/10min |
| density | 23°C | ISO 1183 | 1.10 g/cm³ |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.20 % |
| 饱和,23°C | ISO 62 | 0.90 % |
| Thermal performance | Test Condition | Test Method | Bada AG/ABS 20 GF15 |
|---|---|---|---|
| maximum service temperature | IEC 216 | 85 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 115 °C |
| vicat | -- | ISO 306/A50 | 116 °C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 110 °C |
| vicat | -- | ISO 306/B50 | 114 °C |
Contact Us
Get App
Top