Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC D551-7M10203 SABIC INNOVATIVE US
LNP™ THERMOCOMP™
Outdoor applications,Electronic and Electrical Applications,Plastic bag,Architectural Applications
Glass fiber reinforced,Non chloro non bromine fl
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/D551-7M10203 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed,3.20mm | ASTM D648 | 107 °C |
| Linear coefficient of thermal expansion | MD:-40to40°C | ASTME831 | 1.4E-05 cm/cm/°C |
| TD:-40to40°C | ASTME831 | 5.1E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/D551-7M10203 |
|---|---|---|---|
| --1 | ASTM D638 | 15300 Mpa | |
| Bending modulus | 50.0mmSpan | ASTM D790 | 14900 Mpa |
| bending strength | Break,50.0mmSpan | ASTM D790 | 223 Mpa |
| crack | ASTM D638 | 154 Mpa | |
| ISO 527-2/5 | 153 Mpa | ||
| ISO 527-2/5 | 1.9 % | ||
| ASTM D638 | 2.1 % |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/D551-7M10203 |
|---|---|---|---|
| melt mass-flow rate | 300°C/5.0kg | ASTM D1238 | 49 g/10min |
| 300°C/2.16kg | ASTM D1238 | 13 g/10min | |
| Melt Volume Flow Rate (MVR) | 300°C/5.0kg | ASTM D1238 | 29.5 cm3/10min |
| Shrinkage rate | TD:24hr | ASTM D955 | 0.050-0.20 % |
| MD:24hr | ASTM D955 | 0.050-0.20 % |
| impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/D551-7M10203 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 12 kJ/m² |
| Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 21.0 J |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 38 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ASTM D4812 | 520 J/m |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE US/D551-7M10203 |
|---|---|---|---|
| UL flame retardant rating | 1.00mm | UL 94 | V-0 |