Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC KG-20MRA BK KOTEC JAPAN
CARBO TEX
--
Fiber grade,Filler: Glass fiber reinf,20% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | KOTEC JAPAN/KG-20MRA BK |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 145 °C |
mechanical properties | Test Condition | Test Method | KOTEC JAPAN/KG-20MRA BK |
---|---|---|---|
Bending modulus | ASTM D790 | 5690 Mpa | |
bending strength | ASTM D790 | 152 Mpa | |
elongation | Break | ASTM D638 | 4.0 % |
tensile strength | Break | ASTM D638 | 108 Mpa |
Electrical performance | Test Condition | Test Method | KOTEC JAPAN/KG-20MRA BK |
---|---|---|---|
Arc resistance | ASTM D495 | 110 sec | |
Dielectric constant | 1MHz | ASTM D150 | 3.20 |
Dielectric strength | 1.60mm | ASTM D149 | 20 KV/mm |
Dissipation factor | 1MHz | ASTM D150 | 8E-03 |
Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
Physical properties | Test Condition | Test Method | KOTEC JAPAN/KG-20MRA BK |
---|---|---|---|
Shrinkage rate | MD | ASTM D955 | 0.30-0.50 % |
Water absorption rate | 23°C,24hr | ASTM D570 | <0.20 % |
flammability | Test Condition | Test Method | KOTEC JAPAN/KG-20MRA BK |
---|---|---|---|
UL flame retardant rating | 3.0mm | UL 94 | V-0 |
optical performance | Test Condition | Test Method | KOTEC JAPAN/KG-20MRA BK |
---|---|---|---|
turbidity | 3.00mm | ASTM D1003 | Translucent |