Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS Novodur Ultra 4000PG INEOS STYRO THAILAND
Novodur®
--
Heat resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | INEOS STYRO THAILAND/Novodur Ultra 4000PG |
|---|---|---|---|
| Melt volume flow rate | 220℃,10kg | ISO 1133 | 7.00 CM |
| density | ISO 1183 | 1.05 g/cm |
| Mechanical properties | Test Condition | Test Method | INEOS STYRO THAILAND/Novodur Ultra 4000PG |
|---|---|---|---|
| Impact strength of cantilever beam gap | -30℃ | ISO 180/1A | 10.00 KJ/m |
| Tensile strain | 23℃，屈服 | ISO 527-1 | 3.1 % |
| fracture strain | 23℃ | ISO 527-1 | 15 % |
| Flexural modulus | 23℃ | ISO 178 | 2350 Mpa |
| Impact strength of cantilever beam gap | 23℃ | ISO 180/1A | 23.0 KJ/m |
| Tensile modulus | 23℃ | ISO 527-1 | 2400 Mpa |
| Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 20.0 KJ/m |
| -30℃ | ISO 179/1eA | 10.00 KJ/m | |
| Tensile stress | 23℃，屈服 | ISO 527-1 | 46.0 Mpa |
| Shore hardness | ISO 2039-1 | 100.0 Mpa | |
| bending strength | 23℃ | ISO 178 | 73.0 Mpa |
| Electrical performance | Test Condition | Test Method | INEOS STYRO THAILAND/Novodur Ultra 4000PG |
|---|---|---|---|
| dielectric strength | 23℃,1.00mm | IEC 60243-1 | 38 KV/mm |
| Volume resistivity | IEC 60093 | 1E+16 ohm.cm | |
| Dielectric loss | 23℃,1E+6Hz | IEC 60250 | 0.00870 |
| relative permittivity | 23℃,1E+6Hz | IEC 60250 | 2.90 |
| Dielectric loss | 23℃,100Hz | IEC 60250 | 0.00630 |
| Surface Resistivity | IEC 60093 | 1E+16 ohms | |
| relative permittivity | 23℃,100Hz | IEC 60250 | 3.00 |
| physical property | Test Condition | Test Method | INEOS STYRO THAILAND/Novodur Ultra 4000PG |
|---|---|---|---|
| Shrinkage rate | Across Flow,3.00mm | ISO 294-4 | 0.50-0.80 % |
| Flow,3.00mm | ISO 294-4 | 0.50-0.80 % |
| Thermal performance | Test Condition | Test Method | INEOS STYRO THAILAND/Novodur Ultra 4000PG |
|---|---|---|---|
| Linear coefficient of thermal expansion | 23℃-50℃ | ISO 11359-1 | 0.000090 cm/cm℃ |
| Heat distortion temperature | 0.45MPa，未退火，HDT | ISO 75B-1 | 103 °C |
| vicat | 50℃/h 50N | ISO 306 | 107 °C |
| Heat distortion temperature | 1.80MPa，未退火，HDT | ISO 75A-1 | 98.0 °C |
| combustibility | 1.60mm | UL 94 | HB |
Contact Us
Get App
Top