Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC CH8105 1002 B CANGZHOU DAHUA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | CANGZHOU DAHUA/CH8105 1002 B |
|---|---|---|---|
| Rockwell hardness | ISO 2039 | 120 |
| thermal performance | Test Condition | Test Method | CANGZHOU DAHUA/CH8105 1002 B |
|---|---|---|---|
| Glass transition temperature | 10℃/min | ISO 11357 | 149 °C |
| Hot deformation temperature | Unannealed1.8MPa | ISO 75 | 128 °C |
| Annealed0.45MPa | ISO 75 | 144 °C | |
| Vicat softening temperature | 50℃/hr 50N | ISO 306 | 149 °C |
| mechanical properties | Test Condition | Test Method | CANGZHOU DAHUA/CH8105 1002 B |
|---|---|---|---|
| Bending modulus | 2.0mm/min | ISO 178 | 2410 Mpa |
| bending strength | Yield2.0mm/min | ISO 178 | 97 Mpa |
| Charpy Notched Impact Strength | 23℃ | ISO 179 | NB kJ/㎡ |
| elongation | Yield50mm/min | ISO 527 | 6 % |
| Break50mm/mi | ISO 527 | 150 % | |
| Impact strength of cantilever beam gap | 23℃ | ISO 180 | 70 kJ/㎡ |
| Suspended wall beam without notch impact strength | 23℃ | ISO 180 | NB kJ/㎡ |
| Tensile modulus | 1.0mm/min | ISO 527 | 2400 Mpa |
| tensile strength | Yield50mm/min | ISO 527 | 60 Mpa |
| flame retardant performance | Test Condition | Test Method | CANGZHOU DAHUA/CH8105 1002 B |
|---|---|---|---|
| Extreme Oxygen Index | ISO 4589 | 27 % | |
| Ignition temperature of heating wire | 1.5mm | IEC 60695 | 875 °C |
| 3mm | IEC 60695 | 875 °C | |
| Relative temperature of heating wire | 3mm | IEC 60695 | 960 °C |
| 1.5mm | IEC 60695 | 875 °C | |
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| 3.0mm | UL 94 | HB |
| Electrical performance | Test Condition | Test Method | CANGZHOU DAHUA/CH8105 1002 B |
|---|---|---|---|
| Anti leakage trace index | IEC 60112 | 250 V | |
| Dielectric constant | 1MHz | IEC 60250 | 3 |
| 100Hz | IEC 60250 | 3.1 | |
| Dielectric strength | 1.0mm | IEC 60243 | 34 KV/mm |
| Dissipation factor | 1MHz | IEC 60250 | 0.01 |
| 100Hz | IEC 60250 | 0.001 | |
| Surface resistivity | 2.0mm | IEC 60093 | 10000000000000000 Ω |
| Volume resistivity | 2.0mm | IEC 60093 | 200000000000000000 Ω.cm |
| Physical properties | Test Condition | Test Method | CANGZHOU DAHUA/CH8105 1002 B |
|---|---|---|---|
| density | ISO 1183 | 1.2 g/cm³ | |
| melt mass-flow rate | 300°C 1.2kg | ISO 1133 | 10 g/10min |
| Shrinkage rate | Flow2.0mm | ISO 294 | 0.50-0.70 % |
| 垂直2.0mm | ISO 294 | 0.50-0.70 % | |
| Water absorption rate | 23℃ 50RH | ISO 62 | 0.15 % |
| 23°C24hr | ISO 62 | 0.32 % |
| optical performance | Test Condition | Test Method | CANGZHOU DAHUA/CH8105 1002 B |
|---|---|---|---|
| Cleanliness | 2000? | ISO 14782 | 0.8 % |
| Refractive index | ISO 489 | 1.586 | |
| transmissivity | ISO 13468 | 89 % |