Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC LS-2030 9001 MITSUBISHI ENGINEERING JAPAN
IUPILON™
Electrical applications,Automotive Applications
wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LS-2030 9001 |
---|---|---|---|
bending strength | ASTM D790/ISO 178 | 81 kg/cm²(MPa)[Lb/in²] | |
Flexural modulus | ASTM D790/ISO 178 | 2300 kg/cm²(MPa)[Lb/in²] | |
Tensile modulus | ASTM D638/ISO 527 | 2300 kg/cm²(MPa)[Lb/in²] | |
elongation at break | ASTM D638/ISO 527 | 85 % |
Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LS-2030 9001 |
---|---|---|---|
Shrinkage rate | ASTM D955 | 0.5 - 0.7 % | |
density | ASTM D792/ISO 1183 | 1.30 |
processability | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LS-2030 9001 |
---|---|---|---|
process temperature | 280-300 °C | ||
Dry conditions | 热风干燥 120℃---约4-8小时 | ||
screw speed | 50-100 rpm | ||
Temperature | 70-100 °C |
Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LS-2030 9001 |
---|---|---|---|
Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 6.9E-05 mm/mm.℃ |
Contact Us
Get App
Top