Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PSU P-1700 HC SOLVAY USA
UDEL®
Electrical field、Electronic field、Electrical components、Electrical appliances、valve、Valve components、Industrial components、Pipeline components、Pipeline components、Home appliance components、Automotive sector、Food service sector、Surgical instruments、Microwave cooker、Dental application field、Medical supplies、Nursing supplies、Medical devices、Medical devices
dimensional stability 、Electron beam disinfectio、Radiopable、Radiation disinfection、Pressure cooker disinfect、Good disinfection perform、Ethylene oxide disinfecti、Anti gamma radiation、Chemical resistance、Alkali resistant、Alcohol resistance、heat-resisting、Acid resistance、Resistance to hydrocarbon、Detergent resistant、Steam resistant、Thermal disinfection、High toughness、Biocompatibility、Food contact compliance、Hydrolysis resistance、Disinfect with steam、Excellent appearance
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | SOLVAY USA/P-1700 HC |
|---|---|---|---|
| Heat Deflection Temperature | 1.8MPa,未退火 | ASTMD648 | 174 °C |
| Linear thermal expansion coefficient | MD | ASTMD696 | 5.6E-05 cm/cm/°C |
| Physical | Test Condition | Test Method | SOLVAY USA/P-1700 HC |
|---|---|---|---|
| Melt Mass-Flow Rate | 343°C/2.16kg | ASTMD1238 | 6.5 g/10min |
| Moisture Absorption | 24hr | ASTMD570 | 0.30 % |
| Density / Specific Gravity | ASTMD792 | 1.24 g/cm³ | |
| Modeling Shrinkage | MD | ASTMD955 | 0.70 % |
| Mechanical Properties | Test Condition | Test Method | SOLVAY USA/P-1700 HC |
|---|---|---|---|
| Tensile Strength | ASTMD638 | 70.3 Mpa | |
| Tensile Elongation | 断裂 | ASTMD638 | 50to100 % |
| Flexural Modulus | ASTMD790 | 2690 Mpa | |
| Flexural Strength | ASTMD790 | 106 Mpa | |
| Tensile Modulus | ASTMD638 | 2480 Mpa |
| Impact Properties | Test Condition | Test Method | SOLVAY USA/P-1700 HC |
|---|---|---|---|
| Tensile Impact Strength | ASTMD1822 | 420 kJ/m² | |
| Notched Izod Impact Strength | ASTMD256 | 69 J/m |
| Flammability | Test Condition | Test Method | SOLVAY USA/P-1700 HC |
|---|---|---|---|
| Glow Wire Ignition Temperature | 1.6to6.0mm | IEC60695-2-13 | 850 °C |
| Glow Wire Flammability Index | 1.6to6.0mm | IEC60695-2-12 | 960 °C |
| 0.8mm | IEC60695-2-12 | 850 °C | |
| Flame Rating | 4.5mm,NC | UL94 | V-0 |
| 1.5mm,ALL | UL94 | HB | |
| Glow Wire Ignition Temperature | 0.8mm | IEC60695-2-13 | 875 °C |
| Electrical Properties | Test Condition | Test Method | SOLVAY USA/P-1700 HC |
|---|---|---|---|
| Dielectric Strength | ASTMD149 | 17 KV/mm | |
| Dielectric Constant | 60Hz | ASTMD150 | 3.03 |
| 1kHz | ASTMD150 | 3.04 | |
| Dissipation Factor? | 1kHz | ASTMD150 | 1E-03 |
| Volume Resistivity | ASTMD257 | 3E+16 ohms·cm | |
| Dissipation Factor? | 1MHz | ASTMD150 | 6E-03 |
| 60Hz | ASTMD150 | 7E-04 | |
| Dielectric Constant | 1MHz | ASTMD150 | 3.02 |
Contact Us
Get App
Top