Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LLDPE 218W SABIC SAUDI
SABIC®
film
High sliding、High gloss
FDA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Physical | Test Condition | Test Method | SABIC SAUDI/218W |
|---|---|---|---|
| Melt index | ASTM D-1238 | 2.0 g/10min | |
| Solvents | ASTM D-1003 | 15 % | |
| Gloss | 60℃ | ASTM D-2457 | 60 |
| Density | ASTM D-792 | 0.918 g/cm |
| Mechanical Properties | Test Condition | Test Method | SABIC SAUDI/218W |
|---|---|---|---|
| Flexural Strength | ASTM D790/ISO 178 | 10 kg/cm²(MPa)[Lb/in²] | |
| Secant Modulus (1%Secant) | MD，1% | ASTM D-882 | 220 Mpa |
| Tearing Strength | MD | ASTM D-1922 | 135 g |
| Tensile Elongation?(Break) | ASTM D638/ISO 527 | 750 % | |
| Tensile Strength(Yield) | TD | ASTM D-882 | 10 Mpa |
| Tensile Strength | ASTM D638/ISO 527 | 59 kg/cm²(MPa)[Lb/in²] | |
| Gardner Impact | ASTM D-1709 | 110 g | |
| Tearing Strength | TD | ASTM D-1922 | 400 g |
| Secant Modulus (1%Secant) | TD，1% | ASTM D-882 | 260 Mpa |
| Film Puncture Force | SABIC | 63 J/mm | |
| Tensile Strength(Break) | MD | ASTM D-882 | 35 Mpa |
| Tensile Elongation?(Break) | MD | ASTM D-882 | 700 % |
| Tensile Strength(Break) | TD | ASTM D-882 | 59 Mpa |
| Tensile Elongation?(Break) | TD | ASTM D-882 | 750 % |
| Tensile Strength(Yield) | MD | ASTM D-882 | 12 Mpa |
| Physical Properties | Test Condition | Test Method | SABIC SAUDI/218W |
|---|---|---|---|
| Melt Mass-Flow Rate | ASTM D1238/ISO 1133 | 2.0 g/10min | |
| Density | ASTM D792/ISO 1183 | 0.918 |
Contact Us
Get App
Top