Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC EMERGE™ PC 4310-22 Trinseo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodTrinseo/EMERGE™ PC 4310-22
Suspended wall beam without notch impact strength23°C,3.20mm,注塑ASTM D256无断裂
Dart impact23°C,3.20mm,注塑,峰值能量ASTM D376372.3 J
Impact strength of cantilever beam gap23°C,3.20mm,注塑ASTM D256750 J/m
hardnessTest ConditionTest MethodTrinseo/EMERGE™ PC 4310-22
Rockwell hardnessR级,3.20mm,注塑ASTM D785118
Mechanical propertiesTest ConditionTest MethodTrinseo/EMERGE™ PC 4310-22
elongation断裂,3.20mm,注塑ASTM D638120 %
Tensile modulus3.20mm,注塑ASTM D6382340 MPa
tensile strength 断裂,3.20mm,注塑ASTM D63865.5 MPa
bending strength3.20mm,注塑ASTM D79096.5 MPa
tensile strength 屈服,3.20mm,注塑ASTM D63860.0 MPa
Flexural modulus3.20mm,注塑ASTM D7902410 MPa
Electrical performanceTest ConditionTest MethodTrinseo/EMERGE™ PC 4310-22
Dissipation Factor60HzASTM D1501E-03
dielectric constant60HzASTM D1503.00
Volume resistivityASTM D2572E+17 ohms·cm
dielectric strengthASTM D14917 kV/mm
Dissipation Factor1MHzASTM D1502E-03
dielectric constant1MHzASTM D1503.00
flammabilityTest ConditionTest MethodTrinseo/EMERGE™ PC 4310-22
UL flame retardant rating3.2mmUL 94HB
1.6mmUL 94HB
Limiting Oxygen IndexASTM D286326 %
physical property Test ConditionTest MethodTrinseo/EMERGE™ PC 4310-22
Shrinkage rateMDASTM D9550.50to0.70 %
densityASTM D7921.20 g/cm³
melt mass-flow rate300°C/1.2kgASTM D123822 g/10min
Thermal performanceTest ConditionTest MethodTrinseo/EMERGE™ PC 4310-22
Heat distortion temperature1.8MPa,退火,3.99mm，HDTASTM D648139 °C
0.45MPa,退火,3.99mm，HDTASTM D648142 °C
1.8MPa,未退火,3.99mm，HDTASTM D648126 °C
Linear coefficient of thermal expansionMD：-40到80°CASTM D6966.8E-05 cm/cm/°C

Contact Us

Get App

Top