Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 66 MV HI LYONDELLBASELL GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodLYONDELLBASELL GERMANY/66 MV HI
Impact strength of simply supported beam without notch23°C无断裂
-30°C无断裂
hardnessTest ConditionTest MethodLYONDELLBASELL GERMANY/66 MV HI
ball-indentation hardnessISO 2039-1110 Mpa
Mechanical propertiesTest ConditionTest MethodLYONDELLBASELL GERMANY/66 MV HI
Tensile strain (yield)ISO 527-2/1A/505 %
Tensile modulusISO 527-1/1A/12500 Mpa
Tensile stress (yield)ISO 527-2/1A/5065 Mpa
Electrical performanceTest ConditionTest MethodLYONDELLBASELL GERMANY/66 MV HI
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
Volume resistivityIEC 62631-3-1> 1.0E+13 ohms·m
Surface ResistivityIEC 60093> 1.0E+15 ohms
flammabilityTest ConditionTest MethodLYONDELLBASELL GERMANY/66 MV HI
Flammability level3.0 mmHB
burning rate2.00 mmISO 379530 mm/min
2.00 mmFMVSS 30230 mm/min
Burning wire flammability index3.0 mm600 °C
1.5 mm600 °C
Flammability level1.5 mmHB
0.75 mmHB
physical property Test ConditionTest MethodLYONDELLBASELL GERMANY/66 MV HI
Water absorption rate平衡, 23°C, 50% RHISO 622.1 %
Thermal performanceTest ConditionTest MethodLYONDELLBASELL GERMANY/66 MV HI
Heat distortion temperature0.45 MPa, 未退火，HDTISO 75-2/Bf170 °C
1.8 MPa, 未退火，HDTISO 75-2/Af60 °C
vicat--ISO 306/A50230 °C
--ISO 306/B50215 °C
ball-indentation hardness(60°C)IEC 60695-10-2通过
injectionTest ConditionTest MethodLYONDELLBASELL GERMANY/66 MV HI
Suggested maximum moisture content0.040 to 0.10
Processing (melt) temperature270 to 290
drying temperature80
Temperature60 to 100
drying time3.0 to 4.0

Contact Us

Get App

Top