Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC SPC0613L HENAN SHENMA POLYCARBONATE
--
Plate
currency
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| heat resistance | Test Condition | Test Method | HENAN SHENMA POLYCARBONATE/SPC0613L |
|---|---|---|---|
| Load deformation temperature (unannealed) | ASTMD648 | ||
| Vicat softening temperature point | ASTMD1525 | 129 | |
| Load deformation temperature (annealing) | ASTMD648 | 145 C |
| Resistance | Test Condition | Test Method | HENAN SHENMA POLYCARBONATE/SPC0613L |
|---|---|---|---|
| Impact energy of cantilever beam gap | ASTMD256 | 907 Jm | |
| Suspended hip beam without notch impact energy | ASTMD256 | NO BREAK |
| Electronic properties | Test Condition | Test Method | HENAN SHENMA POLYCARBONATE/SPC0613L |
|---|---|---|---|
| Dielectric Strength | ASTMD149 | 17 KV/mm | |
| Loss factor | ASTMD150 | 0.001 | |
| Volume resistivity | ASTMD257 | 2.0E+17 52-cm |
| Flammability index | Test Condition | Test Method | HENAN SHENMA POLYCARBONATE/SPC0613L |
|---|---|---|---|
| Flame retardant grade | UL94 | HB | |
| Oxygen index | ASTMD2863 | 26 % |
| Mechanical properties | Test Condition | Test Method | HENAN SHENMA POLYCARBONATE/SPC0613L |
|---|---|---|---|
| Lazhong yield stress (yield strength) | ASTMD638 | 60 Mpa | |
| Tensile modulus of elasticity | ASTMD638 | 2480 Mpa | |
| Tensile fracture stress (fracture strength) | ASTMD638 | 72.4 Mpa | |
| flexural modulus | ASTMD790 | 2410 Mpa | |
| elongation at break | ASTMD638 | 150 % |
| optical properties | Test Condition | Test Method | HENAN SHENMA POLYCARBONATE/SPC0613L |
|---|---|---|---|
| transmittance | ASTMD1003 | 89 % | |
| refractive index | ASTMD542 | 1.586 |
| physical property | Test Condition | Test Method | HENAN SHENMA POLYCARBONATE/SPC0613L |
|---|---|---|---|
| density | ASTMD792 | 1.2 g/cm | |
| Water absorption rate | ASTMD570 | 0.15 % | |
| Melt Index | ASTMD1238 | 6.0 g/10min |
Contact Us
Get App
Top