Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO APS130-7002 SABIC INNOVATIVE US
NORYL GTX™
medical care
Thermal stability、Glass fiber reinforced、Filler: Glass fiber reinf、30% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/APS130-7002 |
|---|---|---|---|
| bending strength | ASTM D790 | 157 Mpa | |
| elongation | 断裂 | 内部方法 | 8.0 % |
| Flexural modulus | ASTM D790 | 8430 Mpa | |
| tensile strength | 屈服 | 内部方法 | 113 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/APS130-7002 |
|---|---|---|---|
| dielectric strength | 1.60mm,inOil | ASTM D149 | 22 KV/mm |
| dielectric constant | 60Hz | ASTM D150 | 3.30 |
| 50Hz | ASTM D150 | 3.30 | |
| Surface Resistivity | ASTM D257 | 1E+16 ohms |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/APS130-7002 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.25-0.70 % |
| Water absorption rate | 24hr | ASTM D570 | 0.020 % |
| melt mass-flow rate | 300°C/5.0kg | ASTM D1238 | 29 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/APS130-7002 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：-30到30°C | ASTME831 | 2.5E-5到5.5E-5 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火,6.40mm，HDT | ASTM D648 | 267 °C |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 267 °C |
Contact Us
Get App
Top