Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 TS250G7F2 浙江新力
--
高耐热性,尺寸稳定性,可激光打标
塑壳断路器等电子电器外壳
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | 浙江新力/TS250G7F2 |
|---|---|---|---|
| Tensile strength at break | IS0527 | 180 Mpa | |
| Yield bending strength | IS0178 | 280 Mpa | |
| Flexural modulus | IS0178 | 8500 Mpa | |
| elongation at break | IS0527 | 2.5 % | |
| Impact strength of simply supported beam without notch | IS0179 | 90 kJ/m² | |
| Charpy Notched Impact Strength | IS0179 | 20 kJ/m² |
| other | Test Condition | Test Method | 浙江新力/TS250G7F2 |
|---|---|---|---|
| Linear forming shrinkage rate | IS02577 | 0.5 % | |
| Surface Resistivity | 1.77E+14 Ω | ||
| proof tracking index | 3mm/v | IEC60112 | 500 |
| Flame retardant performance | Test Condition | Test Method | 浙江新力/TS250G7F2 |
|---|---|---|---|
| UL 94 | 厚度3.0mm | UL94 | ℃ |
| UL94 | 厚度1.5mm | UL94 | ℃ |
| 厚度2.0mm | UL94 | ℃ | |
| 厚度0.8mm | UL94 | ℃ |
| physical property | Test Condition | Test Method | 浙江新力/TS250G7F2 |
|---|---|---|---|
| density | IS01183 | 1.42 g/cm³ | |
| Water absorption rate | IS062 | 1.2 % |
| Thermal performance | Test Condition | Test Method | 浙江新力/TS250G7F2 |
|---|---|---|---|
| GWIT | 厚度3.0mm | IEC60695-2-13 | ℃ |
| GWFI | 厚度3.0mm | IEC60695-2-12 | ℃ |
| GWIT | 厚度1.5mm | IEC60695-2-13 | ℃ |
| 厚度0.8mm | IEC60695-2-13 | ℃ | |
| Heat distortion temperature | 1.8MPa | IS076 | 200 ℃ |
| 0.45MPa | IS076 | ℃ | |
| GWFI | 厚度0.8mm | IEC60695-2-12 | ℃ |
| GWIT | 厚度2.0mm | IEC60695-2-13 | ℃ |
| GWFI | 厚度2.0mm | IEC60695-2-12 | 650 ℃ |
| 厚度1.5mm | IEC60695-2-12 | ℃ |
Contact Us
Get App
Top