Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 FR50 DUPONT USA
Zytel®
Fitness equipment,Automotive sector,Electrical field,Electronic field,Electrical appliances
Flame retardant,Glass fiber reinforced
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | DUPONT USA/FR50 |
|---|---|---|---|
| Heat Deflection Temperature | 0.45MPa，HDT | ASTM D-648 | 50%RH｜- °C |
| melting temperature | 262 ℃（℉） | ||
| Heat Deflection Temperature | 1.80MPa，HDT | ASTM D-648 | 50%RH｜- °C |
| HDT | ASTM D648/ISO 75 | 257 ℃（℉） | |
| melting temperature | ASTM D-3418 | 262 °C |
| mechanical properties | Test Condition | Test Method | DUPONT USA/FR50 |
|---|---|---|---|
| elongation | 断裂 | ASTM D-638 | 50%RH｜4 % |
| Elongation at break | ASTM D638/ISO 527 | 2.5 % | |
| tensile strength | ASTM D638/ISO 527 | 169 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D-790 | 50%RH｜- Mpa | |
| tensile strength | ASTN D-638 | 50%RH｜134 Mpa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 50%RH｜105 J/m | |
| ASTM D256/ISO 179 | 100 kg·cm/cm(J/M)ft·lb/in | ||
| flexural modulus | ASTM D790/ISO 178 | 8960 kg·cm/cm(J/M)ft·lb/in | |
| bending strength | ASTM D790/ISO 178 | 240 kg·cm/cm(J/M)ft·lb/in | |
| flexural modulus | ASTM D-790 | 50%RH｜6900 Mpa |
| Basic performance | Test Condition | Test Method | DUPONT USA/FR50 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D-570 | 50%RH｜- % |
| Electrical performance | Test Condition | Test Method | DUPONT USA/FR50 |
|---|---|---|---|
| Surface Resistivity | ASTM D257/IEC 60093 | 10 Ω | |
| Dissipation Factor | 106Hz | ASTM D-150 | 50%RH｜0.041 |
| 103Hz | ASTM D-150 | 50%RH｜0.113 | |
| volume resistivity | ASTM D257/IEC 60093 | 10 Ω.cm | |
| dielectric constant | 103Hz | ASTM D-150 | 50%RH｜5.1 |
| ASTM D150/IEC 60250 | 3.6 | ||
| volume resistivity | ASTM D-257 | 50%RH｜1011 Ω.m | |
| dielectric strength | 3.2mm | ASTM D-149 | 50%RH｜15.6 KV/mm |
| dielectric constant | 106Hz | ASTM D-150 | 50%RH｜3.8 |
| Surface Resistivity | ASTM D-257 | 50%RH｜1011 |
| other | Test Condition | Test Method | DUPONT USA/FR50 |
|---|---|---|---|
| characteristic | 注塑级 |
| Physical properties | Test Condition | Test Method | DUPONT USA/FR50 |
|---|---|---|---|
| shrinkage rate | 3.2mm,flow | ASTM D-792 | 50%RH｜- % |
| density | ASTM D792/ISO 1183 | 1.56 | |
| Water absorption rate | ASTM D570/ISO 62 | 0.5 % |
Contact Us
Get App
Top