Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT/ASA A3 GF 30 Schulman Plastics
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodSchulman Plastics/A3 GF 30
ball-indentation hardnessH 358/30ISO 2039-1184
Mechanical propertiesTest ConditionTest MethodSchulman Plastics/A3 GF 30
Charpy Notched Impact Strength-30℃ISO 179/1eU48 kJ/m²
-30℃ISO 179/1eA8.0 kJ/m²
Tensile modulusISO 527-2/1A/19300 MPa
tensile strength 断裂ISO 527-2/1A/5118 MPa
Charpy Notched Impact Strength23℃ISO 179/1eU50 kJ/m²
Tensile strain断裂ISO 527-2/1A/52.5 %
Charpy Notched Impact Strength23℃ISO 179/1eA9.0 kJ/m²
Electrical performanceTest ConditionTest MethodSchulman Plastics/A3 GF 30
Surface ResistivityIEC 60093＞1.0E+16 ohm
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 1
Volume resistivityIEC 60093＞1.0E+14 ohm·cm
otherTest ConditionTest MethodSchulman Plastics/A3 GF 30
Flammability levelUL 94HB
Burning wire flammability index3.00 mmIEC 60695-2-12750 ℃
Limiting Oxygen IndexISO 4589-220 %
burning rate2.00 mmFMVSS 30216 mm/min
Hot filament ignition temperature1.50 mmIEC 60695-2-13725 ℃
3.00 mmIEC 60695-2-13775 ℃
Burning wire flammability index1.50 mmIEC 60695-2-12700 ℃
physical property Test ConditionTest MethodSchulman Plastics/A3 GF 30
Melt volume flow rateISO 113320.0 cm³/10min
densityMVR 250°C/2.16 kgISO 1183/A1.42 g/cm³
Thermal performanceTest ConditionTest MethodSchulman Plastics/A3 GF 30
Heat distortion temperature0.45 MPa, 未退火，HDTISO 75-2/Bf214 ℃
ball-indentation hardness200℃IEC 60695-10-2Pass
vicat--ISO 306/A50210 ℃
--ISO 306/B50145 ℃
Heat distortion temperature1.8 MPa, 未退火，HDTISO 75-2/Af180 ℃

Contact Us

Get App

Top