Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ASA 485CS USA Network Polymers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | USA Network Polymers/ 485CS |
|---|---|---|---|
| Impact strength of cantilever beam gap | -40°C,3.18mm | ASTM D256 | 43 J/m |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 24.0 J |
| -30°C,TotalEnergy | ASTM D3763 | 6.00 J | |
| Impact strength of cantilever beam gap | -18°C,3.18mm | ASTM D256 | 64 J/m |
| Dart impact | -18°C,TotalEnergy | ASTM D3763 | 16.0 J |
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 130 J/m |
| hardness | Test Condition | Test Method | USA Network Polymers/ 485CS |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 69 |
| Mechanical properties | Test Condition | Test Method | USA Network Polymers/ 485CS |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 1450 MPa | |
| Flexural modulus | ASTM D790 | 1380 MPa | |
| tensile strength | 屈服 | ASTM D638 | 26.5 MPa |
| bending strength | ASTM D790 | 38.6 MPa |
| optical performance | Test Condition | Test Method | USA Network Polymers/ 485CS |
|---|---|---|---|
| gloss | 60°5 | ASTM D523 | 20 |
| 60°4 | ASTM D523 | 10 |
| flammability | Test Condition | Test Method | USA Network Polymers/ 485CS |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | USA Network Polymers/ 485CS |
|---|---|---|---|
| density | ASTM D792 | 1.06 g/cm³ | |
| melt mass-flow rate | 220°C/10.0kg | ASTM D1238 | 5.0 g/10min |
| Thermal performance | Test Condition | Test Method | USA Network Polymers/ 485CS |
|---|---|---|---|
| vicat | ASTM D1525 | 100 °C | |
| Heat distortion temperature | 1.8MPa,未退火,3.18mm，HDT | ASTM D648 | 68.3 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 9.4E-05 cm/cm/°C |
Contact Us
Get App
Top